The Model HVA wall exhaust fan is designed for general ventilation in commercial and industrial applications including factories, warehouses, gymnasiums, underground parking garages, etc. These fans are typically used for high volume, high static pressure applications. The model HVA is designed and constructed for efficient and economical operation while maximizing performance for heavy duty applications. These fans can be used in exhaust or supply applications.
FEATURES:
Heavy gauge steel fan panel with deep spun and flared venturi for maximum efficiency.
Heavy gauge, welded steel motor and bearing supports.
Cast aluminum airfoil blades.
Heavy duty cast iron pillow block bearings.
TEFC motors are standard.
208/230/460 Volts.
*NOTE: The motor Full Load Amperage ratings are meant to be used as a General guideline only. The ratings are from the primary motor supplier. These amperage ratings may vary slightly if a different motor supplier is used. It is also possible that a motor manufacture may modify / improve / update a motor in which the amperage rating will change slightly.
1 SPEED
TYPE =EXHAUST
PHASE = 3
VOLTAGE = 208-230/460
WARRANTY = 1 YEAR
DRIVE = BELT
BLADE DIA. (in) = 24
AMPS = -
WEIGHT (lbs) =101
SPEED(s) = 1
MNT POS = Wall
NO. OF BLADES = 6
MOTOR ENCLO. =TEFC
HP = 3/4
CFM = 6,750
RPM = 1,180
dBA @ 5 ft = 65
AMPS =tba
HP = 1
CFM = 7,400
RPM = 1,295
dBA @ 5 ft = 67
AMPS =4.0-3.8/1.8
HP = 1.5
CFM = 8,430
RPM = 1,475
dBA @ 5 ft = 70
AMPS =5.0-4.8/2.3
HP = 2
CFM = 9,260
RPM = 1,620
dBA @ 5 ft = 72
AMPS =6.0-5.8/2.9
HP = 3
CFM = 10,800
RPM = 1,890
dBA @ 5 ft = 76
AMPS =8.4-7.6/3.4
DIMENSIONS:
A = 29.625" SQUARE
B = 4.0"
C = 18" (Belt Drive Motor Frame)
The Model HVA wall exhaust fan is designed for general ventilation in commercial and industrial applications including factories, warehouses, gymnasiums, underground parking garages, etc. These fans are typically used for high volume, high static pressure applications. The model HVA is designed and constructed for efficient and economical operation while maximizing performance for heavy duty applications. These fans can be used in exhaust or supply applications.
FEATURES:
Heavy gauge steel fan panel with deep spun and flared venturi for maximum efficiency.
Heavy gauge, welded steel motor and bearing supports.
Cast aluminum airfoil blades.
Heavy duty cast iron pillow block bearings.
TEFC motors are standard.
208/230/460 Volts.
*NOTE: The motor Full Load Amperage ratings are meant to be used as a General guideline only. The ratings are from the primary motor supplier. These amperage ratings may vary slightly if a different motor supplier is used. It is also possible that a motor manufacture may modify / improve / update a motor in which the amperage rating will change slightly.
© 2010