The PV series of duct exhaust or supply fans have been specifically designed for simple installation and many years of maintenance free operation. The PV fans can be mounted at any point along the duct. The totally enclosed motor design allows the PV fans to operate in high moisture, lint and dust laden air. The PV fans are ideally suited for a wide range of residential, commercial and industrial exhaust and intake ventilation applications. Among typical applications would include the following:

RESIDENTIAL:

• Bathrooms
• Warm or Cool Air Transfer
• Kitchen Range Hoods
• Laundry Rooms (Dryer Boosting)
• Radon Mitigation

COMMERCIAL:

• Locker Rooms
• Conference Rooms
• Bars & Restaurants
• Cafeterias
• Offices
• Make-Up Air Applications

INDUSTRIAL:

• Welding Fume Extraction
• Spot Ventilation
• Equipment Cooling
• Workshops & Smoking Areas
• Warehouses

CASING:

• Manufactured from high grade pressed galvanized steel, with black baked enamel coating.
• Extra long inlet and discharge collars make installation quick and trouble free.
• Supplied with a strong galvanized steel mounting bracket.
• Supplied with a remote mounting, prewired wiring junction box.

WHEEL / IMPELLER:

• Backward curved centrifugal type.
• Factory matched to an external rotor motor and dynamically balanced to eliminate vibration.

MOTORS:

• Totally enclosed permanent spit capacitor start and run external rotor motors.
• 115V 60Hz (single phase) electrical connection.
• Permanently sealed, self lubricating precision ball bearings.
• Safety Thermal Overload Protection Cut-Out (Automatic Reset Type).
• All Models are suitable for working airstreams up to 140° F

CODE APPROVAL:

• All models have been independently safety tested by Under writers Laboratories, Inc. and are UL and cUL Listed.
• Independently safety tested by Intertek laboratories, and are ETL Listed.
• Independently tested for Airflow Performance. The PV range is licensed to bear the AMCA seal for Air Performance.
• The PV product range is certified by the Home Ventilating Institue (HVI) for Air Performance.

*Performance certified is for installation type D-Ducted inlet, Ducted outlet. Performance ratings do not include the effect of appurtenances (accessories). Speed (RPM or RPS) shown is nominal. Performance is based on actual speed of test.

DIMENSIONAL DATA: (inches)

A = 7 5/8
B = 1
C = 9 1/2
D = 3 7/8
E = 6 11/16
F = 8 7/8
G = 6 1/16
H = 10 13/16
I = 3 1/4

The PV series of duct exhaust or supply fans have been specifically designed for simple installation and many years of maintenance free operation. The PV fans can be mounted at any point along the duct. The totally enclosed motor design allows the PV fans to operate in high moisture, lint and dust laden air. The PV fans are ideally suited for a wide range of residential, commercial and industrial exhaust and intake ventilation applications. Among typical applications would include the following:

RESIDENTIAL:

• Bathrooms
• Warm or Cool Air Transfer
• Kitchen Range Hoods
• Laundry Rooms (Dryer Boosting)
• Radon Mitigation

COMMERCIAL:

• Locker Rooms
• Conference Rooms
• Bars & Restaurants
• Cafeterias
• Offices
• Make-Up Air Applications

INDUSTRIAL:

• Welding Fume Extraction
• Spot Ventilation
• Equipment Cooling
• Workshops & Smoking Areas
• Warehouses

CASING:

• Manufactured from high grade pressed galvanized steel, with black baked enamel coating.
• Extra long inlet and discharge collars make installation quick and trouble free.
• Supplied with a strong galvanized steel mounting bracket.
• Supplied with a remote mounting, prewired wiring junction box.

WHEEL / IMPELLER:

• Backward curved centrifugal type.
• Factory matched to an external rotor motor and dynamically balanced to eliminate vibration.

MOTORS:

• Totally enclosed permanent spit capacitor start and run external rotor motors.
• 115V 60Hz (single phase) electrical connection.
• Permanently sealed, self lubricating precision ball bearings.
• Safety Thermal Overload Protection Cut-Out (Automatic Reset Type).
• All Models are suitable for working airstreams up to 140° F

CODE APPROVAL:

• All models have been independently safety tested by Under writers Laboratories, Inc. and are UL and cUL Listed.
• Independently safety tested by Intertek laboratories, and are ETL Listed.
• Independently tested for Airflow Performance. The PV range is licensed to bear the AMCA seal for Air Performance.
• The PV product range is certified by the Home Ventilating Institue (HVI) for Air Performance.

*Performance certified is for installation type D-Ducted inlet, Ducted outlet. Performance ratings do not include the effect of appurtenances (accessories). Speed (RPM or RPS) shown is nominal. Performance is based on actual speed of test.

DIMENSIONAL DATA: (inches)

A = 7 5/8
B = 1
C = 9 1/2
D = 3 7/8
E = 6 11/16
F = 8 7/8
G = 6 1/16
H = 10 13/16
I = 3 1/4

MANUAL FOR DUCT FAN