*PICTURE IS A REPRESENTATION OF A KIT ONLY - COMPONENTS INCLUDED IN KIT ARE LISTED BELOW.

IMPORTANT: If venting in an non-insulated attic space, or in a cold climate, insulated flexible duct is strongly recommended for condensation issues.

The TD-MIXVENT fan kits provide all the hardware needed to complete a simple in-line ducted ventilation installation. The kit includes a powerful TD in-line fan, exterior and interior grills, tough flexible aluminum ducting (not Included in the KIT-TD150) and a roll of duct tape. The TD-MIXVENT fan kit is the ideal solution for any simple in-line ducted fan installation.

This TD-MIXVENT Kit Includes the Following Components:

• 1 TD150 6" Exhaust Fan
• 1 Plastic round grill (BOR-150)
• 1 Plastic Louver
• 1 roll adhesive tape (BA)
• 1 Integral Mounting Bracket

FAN DETAILS

*IMPORTANT: If venting in an non-insulated attic space, or in a cold climate, insulated flexible duct is strongly recommended for condensation issues.

The TD-Mixvent series of in-line duct fans have been specially designed to maximize the airflow performance with minimal noise levels within the smallest and most compact of casing sizes. This makes it the ultimate solution for small to medium sized ventilation installations which require a high air-flow to pressure ratio and occupy only the minimum space possible. Example: false ceiling voids, cupboards and many other limited space environments. All models include a "removable body" feature that enables the motor-impeller assembly to be completely removed or replaced without the need to interfere with the attached ducting. The TD fans are ideally suited for a wide range of residential, commercial and industrial exhaust and intake ventilation applications. Typical applications would include the following.

RESIDENTIAL:

• Bathrooms
• Warm or Cool Air Transfer
• Kitchen Range Hoods
• Utility Rooms

COMMERCIAL:

• Locker Rooms
• Conference Rooms
• Bars & Restaurants
• Cafeterias
• Offices
• Make-Up Air Applications

INDUSTRIAL:

• Welding Fume Extraction
• Spot Ventilation
• Equipment Cooling
• Workshops & Smoking Areas

CONSTRUCTION:

Models 100X, 150 and 200X are manufactured in tough reinforced plastic, the fan duct connection flanges are manufacutred from reinforced plastic, except for the 200 and 200x which are constructed from epoxy-polyester coated metal.

IMPELLERS:

The impeller blades for models 100x, 150 and 200x are molded in tough ABS plastic. Model 200 is metal.

MOTORS:

Model 100x is Single-phase, 120V 60Hz, shaded pole induction asynchronous motor in die cast aluminum. All motors include direct two speed connection and are also suitable for voltage speed control.

• Class 1 electrical insulation
• IP 44 Protection
• Class B Motor Insulation
• Safety auto reset Thermal Overload Protection (fuse type)
• Self-lubricating sleeve bearings.
• Suitable for working airstreams up to 104° F (40°C).

2 SPEED
TYPE = In-Line	CFM LOW = 218	VOLTAGE = 120
WEIGHT (lbs) = 7	CFM HIGH= 293	RPM LOW = 1,709
MAX WATTS LOW = 54	DUCT DIA. (in) = 6"	RPM HIGH = 2,289
MAX WATTS HIGH = 65		WARRANTY = 7 Year

*Performance certified is for installation type D-Ducted inlet, Ducted outlet. Performance ratings do not include the effect of appurtenances(accessories). Speed (RPM or RPS) shown is nominal. Performance is based on actual speed of test.

DIMENSIONAL DATA: (inches)

X = 8 3/8
A = 18 1/4
B = 7 7/8
C = 5 9/16
D = 5 13/16
E = 4 3/8
F = 5 1/8
G = 3 1/8
H = 2 1/4

*PICTURE IS A REPRESENTATION OF A KIT ONLY - COMPONENTS INCLUDED IN KIT ARE LISTED BELOW.

IMPORTANT: If venting in an non-insulated attic space, or in a cold climate, insulated flexible duct is strongly recommended for condensation issues.

The TD-MIXVENT fan kits provide all the hardware needed to complete a simple in-line ducted ventilation installation. The kit includes a powerful TD in-line fan, exterior and interior grills, tough flexible aluminum ducting (not Included in the KIT-TD150) and a roll of duct tape. The TD-MIXVENT fan kit is the ideal solution for any simple in-line ducted fan installation.

This TD-MIXVENT Kit Includes the Following Components:

• 1 TD150 6" Exhaust Fan
• 1 Plastic round grill (BOR-150)
• 1 Plastic Louver
• 1 roll adhesive tape (BA)
• 1 Integral Mounting Bracket

FAN DETAILS

*IMPORTANT: If venting in an non-insulated attic space, or in a cold climate, insulated flexible duct is strongly recommended for condensation issues.

The TD-Mixvent series of in-line duct fans have been specially designed to maximize the airflow performance with minimal noise levels within the smallest and most compact of casing sizes. This makes it the ultimate solution for small to medium sized ventilation installations which require a high air-flow to pressure ratio and occupy only the minimum space possible. Example: false ceiling voids, cupboards and many other limited space environments. All models include a "removable body" feature that enables the motor-impeller assembly to be completely removed or replaced without the need to interfere with the attached ducting. The TD fans are ideally suited for a wide range of residential, commercial and industrial exhaust and intake ventilation applications. Typical applications would include the following.

RESIDENTIAL:

• Bathrooms
• Warm or Cool Air Transfer
• Kitchen Range Hoods
• Utility Rooms

COMMERCIAL:

• Locker Rooms
• Conference Rooms
• Bars & Restaurants
• Cafeterias
• Offices
• Make-Up Air Applications

INDUSTRIAL:

• Welding Fume Extraction
• Spot Ventilation
• Equipment Cooling
• Workshops & Smoking Areas

CONSTRUCTION:

Models 100X, 150 and 200X are manufactured in tough reinforced plastic, the fan duct connection flanges are manufacutred from reinforced plastic, except for the 200 and 200x which are constructed from epoxy-polyester coated metal.

IMPELLERS:

The impeller blades for models 100x, 150 and 200x are molded in tough ABS plastic. Model 200 is metal.

MOTORS:

Model 100x is Single-phase, 120V 60Hz, shaded pole induction asynchronous motor in die cast aluminum. All motors include direct two speed connection and are also suitable for voltage speed control.

• Class 1 electrical insulation
• IP 44 Protection
• Class B Motor Insulation
• Safety auto reset Thermal Overload Protection (fuse type)
• Self-lubricating sleeve bearings.
• Suitable for working airstreams up to 104° F (40°C).

2 SPEED
TYPE = In-Line	CFM LOW = 218	VOLTAGE = 120
WEIGHT (lbs) = 7	CFM HIGH= 293	RPM LOW = 1,709
MAX WATTS LOW = 54	DUCT DIA. (in) = 6"	RPM HIGH = 2,289
MAX WATTS HIGH = 65		WARRANTY = 7 Year

*Performance certified is for installation type D-Ducted inlet, Ducted outlet. Performance ratings do not include the effect of appurtenances(accessories). Speed (RPM or RPS) shown is nominal. Performance is based on actual speed of test.

DIMENSIONAL DATA: (inches)

X = 8 3/8
A = 18 1/4
B = 7 7/8
C = 5 9/16
D = 5 13/16
E = 4 3/8
F = 5 1/8
G = 3 1/8
H = 2 1/4