* COMPLETE WITH REAR SLEEVE AND BACKGUARD
The Model HVA wall exhaust
fan is designed for general ventilation in heavy duty commercial and industrial
applications. Heavy duty airfoil-cast aluminum or anti-static glass reinforced
nylon blades are standard on HVA series fans providing maximum performance at
low sound levels. Cast aluminum airfoil blades are available on 24 - 48: sizes.
Electro anti-static glass reinforced nylon blades are available on 54 - 60"
sizes.
These fans are typically
used for high volume, high static pressure applications. The HVA is designed
and constructed for efficient and economical operations while maximizing performance
for heavy duty applications. This fan is used for exhaust applications. Please
consult factory for supply applications.
* Fan blades are tested
in accordance with AMCA standard 210, figure 12
FEATURES:
- Heavy gauge steel fan
panel with deep spun and flared venturi for maximum efficiency.
- Heavy gauge, welded steel
motor and bearing supports.
- Balanced cast aluminum
airfoil blades (24" - 48")
- Electric anti-static
glass reinforced nylon blades available in 54" - 60"
- Heavy duty cast iron
pillow block bearings.
- TEFC motors are standard.
- 115/230 Volts 1-Phase
(230V only on 3HP and above).
- 208/230/460 Volts 3-Phase
|
1
SPEED
|
| TYPE
=EXHAUST |
PHASE
= 3 |
VOLTAGE
= 115/230v |
WARRANTY
= 1 YEAR |
| DRIVE
= BELT |
BLADE
DIA. (in) = 24 |
AMPS
= - |
WEIGHT
(lbs) =140
|
| SPEED(s)
= 1 |
MNT
POS = Wall |
NO.
OF BLADES = 6 |
MOTOR
ENCLO. =TEFC |
| HP
=
3/4 |
CFM
= 6,750 |
RPM
=
1,180 |
dBA
@ 5 ft = 65 |
| HP
= 1 |
CFM
= 7,400 |
RPM
=
1,295 |
dBA
@ 5 ft = 67 |
| HP
= 1.5 |
CFM
= 8,430 |
RPM
= 1,475 |
dBA
@ 5 ft =
70 |
| HP
=
2 |
CFM
=
9,260 |
RPM
= 1,620 |
dBA
@ 5 ft = 72 |
| HP
=
3 |
CFM
= 10,800 |
RPM
= 1,890 |
dBA
@ 5 ft = 76 |
| DIMENSIONS:
CABINET GUARD & SHUTTER (CBS) |
| A = 29 7/8" |
| B = 24" |
| C = 2 1/4" |
| D = 26" |
*For 7 1/2 HP and 10 HP,
Add 6" -+ For 15 HP and 20 HP, add 8"
| DIMENSIONS:
FRONT SLEEVE & SHUTTER (SLS) |
| A = 29 7/8" |
| B = 24" |
| C = 2 1/4" |
| D = 19 1/2" |
| E = 12 1/2" |
| DIMENSIONS:
REAR SLEEVE & BACK GUARD (SLB) |
| A = 29 7/8" |
| B = 17" |
| C = 3 5/8" |
*For 5 HP and up, add 5
1/2" -+ For 15 HP and 20 HP, add 4"
