These roof exhausters are
used for the exhaust of relatively clean air from a wide range of commercial,
industrial and institutional buildings such a manufacturing and assembly plants,
office buildings, schools, hospitals, restaurants, athletic facilities and many
others.
The non overloading centrifugal
wheel with its higher static pressure capabilities makes this suitable for either
ducted or nonducted applications. It's roof mounting permits location near the
area to be ventilated, allowing short duct runs and more efficient operation.
The aluminum exterior provides
an attractive appearance. Belt drive results in lower operating RPM and sound
levels, making the Model DB well suited to applications where quiet opertion
is important. Belt drive also permits easy performance adjustment when needed
to balance the total ventilation system.
CONSTRUCTION
Housing
- Heavy-gauge aluminum
for extra strength with prepunched mounting hole.
- Neoprene isolators for
reduction of vibration and sound.
- Cover easily removed
for quick access to motor compartment.
- Water tight conduit tube
for easy electrical connection from below roof.
- Aluminum birdscreen and
disconnect are included on standard models.
- Stainless steel exterior
fasteners.
Centrifugal Wheel
- All aluminum backward
inclined wheel.
- Non overloading for safe
operation in ducted systems.
- Statically and dynamically
balanced for smooth operation.
Drives
- Sized for minimum 150%
of drive hosepower.
- Machined cast iron adjustable
motor pulleys.
- Adjustable base for belt
tensioning.
- Nonstatic oil resistant
v-belts.
Motors
- Single speed open drip-proof
are standard.
- All motors are rated
for continuous duty.
- 182T and larger motors
shipped unmounted for field installation.
- Disconnect switch standard
with single speed drip-proof motors.
Bearings
- Heavy-duty ball bearing
type.
- Prelubricated and permanently
sealed.
|
1
SPEED
|
| TYPE
= Centrifugal |
CFM
= 1339 |
VOLTAGE
= 115 |
| WEIGHT
(lbs) = 80 |
WHEEL
SIZE (in) = 9 |
BHP
= 0.20 |
| HP
= 1/4 |
MOTOR
= Open Drip-Proof |
RPM
= 1310 |
| PHASE
= 1 |
SONES
= 6.6 @ 1/4 SP
|
WARRANTY
= 1 Year Motor |
| DRIVE
= Belt
Drive |
|
|
DIMENSIONAL DATA
A = 20 1/2 inches
B = 17 1/2 inches
C = 16 1/2 inches
D = 3 1/2 inches
E = 16 1/8 inches
F = 1 3/4 inches
Roof Opening = 11 1/2 inches
