The PV series of duct exhaust
or supply fans have been specifically designed for simple installation and many
years of maintenance free operation. The PV fans can be mounted at any point
along the duct. The totally enclosed motor design allows the PV fans to operate
in high moisture, lint and dust laden air. The PV fans are ideally suited for
a wide range of residential, commercial and industrial exhaust and intake ventilation
applications. Among typical applications would include the following:
RESIDENTIAL:
- Bathrooms
- Warm or Cool Air Transfer
- Kitchen Range Hoods
- Laundry Rooms (Dryer
Boosting)
- Radon Mitigation
COMMERCIAL:
- Locker Rooms
- Conference Rooms
- Bars & Restaurants
- Cafeterias
- Offices
- Make-Up Air Applications
INDUSTRIAL:
- Welding Fume Extraction
- Spot Ventilation
- Equipment Cooling
- Workshops & Smoking
Areas
- Warehouses
CASING:
- Manufactured from high
grade pressed galvanized steel, with black baked enamel coating.
- Extra long inlet and
discharge collars make installation quick and trouble free.
- Supplied with a strong
galvanized steel mounting bracket.
- Supplied with a remote
mounting, prewired wiring junction box.
WHEEL / IMPELLER:
- Backward curved centrifugal
type.
- Factory matched to an
external rotor motor and dynamically balanced to eliminate vibration.
MOTORS:
- Totally enclosed permanent
spit capacitor start and run external rotor motors.
- 115V 60Hz (single phase)
electrical connection.
- Permanently sealed, self
lubricating precision ball bearings.
- Safety Thermal Overload
Protection Cut-Out (Automatic Reset Type).
- All Models are suitable
for working airstreams up to 140° F
CODE APPROVAL:
- All models have been
independently safety tested by Under writers Laboratories, Inc. and are UL
and cUL Listed.
- Independently safety
tested by Intertek laboratories, and are ETL Listed.
- Independently tested
for Airflow Performance. The PV range is licensed to bear the AMCA seal for
Air Performance.
- The PV product range
is certified by the Home Ventilating Institue (HVI) for Air Performance.
|
1
SPEED
|
|
TYPE =
In-Line |
CFM
= 402 |
VOLTAGE
= 115 |
| SHIP
WEIGHT (lbs) = 16 |
MOTOR
= TE |
RPM
= 3,100 |
| MAX
WATTS = 130 |
DUCT
DIA. (in) = 8" |
WARRANTY
= 5 Year |
*Performance certified is
for installation type D-Ducted inlet, Ducted outlet. Performance ratings do
not include the effect of appurtenances
(accessories). Speed (RPM or RPS) shown is nominal. Performance is based on
actual speed of test.
DIMENSIONAL DATA:
(inches)
A = 8 1/2
B = 1
C = 13 1/8
D = 7 7/8
E = 6 11/16
F = 8 7/8
G = 7 7/8
H = 14 3/8
I = 3 11/16
