*IMPORTANT: If venting in
an non-insulated attic space, or in a cold climate, insulated flexible duct
is strongly recommended for condensation issues.
The TD-Mixvent series of
in-line duct fans have been specially designed to maximize the airflow performance
with minimal noise levels within the smallest and most compact of casing sizes.
This makes it the ultimate solution for small to medium sized ventilation installations
which require a high air-flow to pressure ratio and occupy only the minimum
space possible. Example: false ceiling voids, cupboards and many other limited
space environments. All models include a "removable body" feature
that enables the motor-impeller assembly to be completely removed or replaced
without the need to interfere with the attached ducting. The TD fans are ideally
suited for a wide range of residential, commercial and industrial exhaust and
intake ventilation applications. Typical applications would include the following.
RESIDENTIAL:
- Bathrooms
- Warm or Cool Air Transfer
- Kitchen Range Hoods
- Utility Rooms
COMMERCIAL:
- Locker Rooms
- Conference Rooms
- Bars & Restaurants
- Cafeterias
- Offices
- Make-Up Air Applications
INDUSTRIAL:
- Welding Fume Extraction
- Spot Ventilation
- Equipment Cooling
- Workshops & Smoking
Areas
CONSTRUCTION:
Models 100X, 150 and 200X
are manufactured in tough reinforced plastic, the fan duct connection flanges
are manufactured
from reinforced plastic, except for the 200 and 200x which are constructed from
epoxy-polyester coated metal.
IMPELLERS:
The impeller blades for
models 100x, 150 and 200x are molded in tough ABS plastic. Model 200 is metal.
MOTORS:
Model 100x is Single-phase,
120V 60Hz, shaded pole induction asynchronous motor in die cast aluminum. All
motors include
direct two speed connection and are also suitable for voltage speed control.
- Class 1 electrical insulation
- IP 44 Protection
- Class B Motor Insulation
- Safety auto reset Thermal
Overload Protection (fuse type)
- Self-lubricating sleeve
bearings.
- Suitable for working
airstreams up to 104° F (40°C).
|
2
SPEED
|
| TYPE
= In-Line |
CFM
LOW = 100 |
VOLTAGE
= 120 |
| WEIGHT
(lbs) = 5 |
CFM
HIGH= 135 |
RPM
LOW = 1,556 |
| MAX
WATTS LOW = 44 |
DUCT
DIA. (in) = 4" |
RPM
HIGH = 2,096 |
|
MAX WATTS HIGH = 60 |
|
WARRANTY
= 5 Year |
*Performance certified is for
installation type D-Ducted inlet, Ducted outlet. Performance ratings do not include
the effect of appurtenances
(accessories). Speed (RPM or RPS) shown is nominal. Performance is based on actual
speed of test.
DIMENSIONAL DATA:
(inches)
X = 7 3/8
A = 11 15/16
B = 6 15/16
C = 4 1/8
D = 3 13/16
E = 3 15/16
F = 3 9/16
G = 3 1/8
H = 2 1/8
