*IMPORTANT: If venting in an non-insulated attic space, or in a cold climate, insulated flexible duct is strongly recommended for condensation issues.
The TD-Mixvent series of in-line duct fans have been specially designed to maximize the airflow performance with minimal noise levels within the smallest and most compact of casing sizes. This makes it the ultimate solution for small to medium sized ventilation installations which require a high air-flow to pressure ratio and occupy only the minimum space possible. Example: false ceiling voids, cupboards and many other limited space environments. All models include a "removable body" feature that enables the motor-impeller assembly to be completely removed or replaced without the need to interfere with the attached ducting. The TD fans are ideally suited for a wide range of residential, commercial and industrial exhaust and intake ventilation applications. Typical applications would include the following.
RESIDENTIAL:
- Bathrooms
- Warm or Cool Air Transfer
- Kitchen Range Hoods
- Utility Rooms
COMMERCIAL:
- Locker Rooms
- Conference Rooms
- Bars & Restaurants
- Cafeterias
- Offices
- Make-Up Air Applications
INDUSTRIAL:
- Welding Fume Extraction
- Spot Ventilation
- Equipment Cooling
- Workshops & Smoking Areas
CONSTRUCTION:
The TD-MIXVENT MODELS, 250 and 315 have a metal casing and are finished in a tough expoxy-polyester paint coating.
IMPELLERS:
The impeller blades for models 250 and 315 are metal.
MOTORS:
Model 250 and 315
- Single-phase induction asynchronous motor, with permanent capacitor and external rotor constructed of die cast aluminum.
- All models include direct two speed connection and are also suitable for voltage speed control.
- Class 1 electrical insulation
- IP 44 Protection
- Thermal Overload Protection
- Class B Motor Insulation
- Sealed For Life, ball bearings
- Suitable for working airstreams up to 140° F (60°C).
| VARIABLE SPEED |
| TYPE = In-Line | CFM LOW = - | VOLTAGE = 115 |
| WEIGHT (lbs) = 30.9 | CFM HIGH= 1050 | RPM LOW = 2,000 |
| MAX WATTS LOW = 208 | DUCT DIA. (in) = 12.4" | RPM HIGH = 2,500 |
| MAX WATTS HIGH = 335 | | WARRANTY = 5 Year |
*Performance certified is for installation type D-Ducted inlet, Ducted outlet. Performance ratings do not include the effect of appurtenances(accessories). Speed (RPM or RPS) shown is nominal. Performance is based on actual speed of test.
DIMENSIONAL DATA: (inches)
X = 14
A = 17 3/4
B = 13 1/4
C = 8 13/16
D = 12 1/4
E = 7 3/8
F = 8 1/4
G = 7 3/16
H = 7
*IMPORTANT: If venting in an non-insulated attic space, or in a cold climate, insulated flexible duct is strongly recommended for condensation issues.
The TD-Mixvent series of in-line duct fans have been specially designed to maximize the airflow performance with minimal noise levels within the smallest and most compact of casing sizes. This makes it the ultimate solution for small to medium sized ventilation installations which require a high air-flow to pressure ratio and occupy only the minimum space possible. Example: false ceiling voids, cupboards and many other limited space environments. All models include a "removable body" feature that enables the motor-impeller assembly to be completely removed or replaced without the need to interfere with the attached ducting. The TD fans are ideally suited for a wide range of residential, commercial and industrial exhaust and intake ventilation applications. Typical applications would include the following.
RESIDENTIAL:
- Bathrooms
- Warm or Cool Air Transfer
- Kitchen Range Hoods
- Utility Rooms
COMMERCIAL:
- Locker Rooms
- Conference Rooms
- Bars & Restaurants
- Cafeterias
- Offices
- Make-Up Air Applications
INDUSTRIAL:
- Welding Fume Extraction
- Spot Ventilation
- Equipment Cooling
- Workshops & Smoking Areas
CONSTRUCTION:
The TD-MIXVENT MODELS, 250 and 315 have a metal casing and are finished in a tough expoxy-polyester paint coating.
IMPELLERS:
The impeller blades for models 250 and 315 are metal.
MOTORS:
Model 250 and 315
- Single-phase induction asynchronous motor, with permanent capacitor and external rotor constructed of die cast aluminum.
- All models include direct two speed connection and are also suitable for voltage speed control.
- Class 1 electrical insulation
- IP 44 Protection
- Thermal Overload Protection
- Class B Motor Insulation
- Sealed For Life, ball bearings
- Suitable for working airstreams up to 140° F (60°C).
| VARIABLE SPEED |
| TYPE = In-Line | CFM LOW = - | VOLTAGE = 115 |
| WEIGHT (lbs) = 30.9 | CFM HIGH= 1050 | RPM LOW = 2,000 |
| MAX WATTS LOW = 208 | DUCT DIA. (in) = 12.4" | RPM HIGH = 2,500 |
| MAX WATTS HIGH = 335 | | WARRANTY = 5 Year |
*Performance certified is for installation type D-Ducted inlet, Ducted outlet. Performance ratings do not include the effect of appurtenances(accessories). Speed (RPM or RPS) shown is nominal. Performance is based on actual speed of test.
DIMENSIONAL DATA: (inches)
X = 14
A = 17 3/4
B = 13 1/4
C = 8 13/16
D = 12 1/4
E = 7 3/8
F = 8 1/4
G = 7 3/16
H = 7
© 2010