CONSTRUCTION: 18
ga. steel cabinet with powder coated finish and control compartment with a hinged
and latched access door, simplifying wiring installation & maintenance.
Product Companies - Markel and Raywall.
HEATING ELEMENT:
Circular copper clad steel element with continuously brazed steel fins formed
to match the air delivery pattern of the fan blade.
OVERHEAT PROTECTION:
All units come equipped with automatic reset type limit controls to de-energize
the heater should an over-temperature situation occur.
FAN and MOTOR: Totally
enclosed, single phase, permanently lubricated, thermally protected motors with
unit bearings on 3 KW - 10 KW models and sleeve bearings on 12.5 KW - 48 KW
models - mounted with rubber insulators to minimize vibration and noise. Fan
assembly enclosed by a heavy gauge, close spaced, chrome plated wire guard.
LOUVER ASSEMBLY:
Louvers are individually adjustable for directional control of air flow and
the louver assembly can be repositioned in the field from down air flow to right
or left directional air flow.
TEMPERATURE CONTROLS:
20 KW through 48 KW units have built in 24 volt transformer for low voltage
remote thermostat application. 25 KW through 48 KW models available in 2-stage
on special order.
INSTALLATION:
- UH Series may be mounted
at a maximum of 45 degrees off of horizontal
- On all models up to 15
KW, 1/4" threaded rod may be used for mounting; on all models 20 KW and
above 5/16" threaded rod may be used.
- Optional wall / ceiling
mounting brackets available for all units.
- Suitable for applications
up to 13,000 feet.
- 24 Control Volts
- 13' RECOM'D MOUNTING
HEIGHT
|
208
VOLT
|
| TYPE
=
Horz. Discharge |
BTU'S
= 85,300 |
CFM
= 1,350 |
| MOUNT POS.
= Wall / Ceiling |
AIR
THROW = 56' |
VOLT
=
208 |
| PHASE
= 1 |
AMPS =
120.2 |
WEIGHT
(lbs) =
55 |
| TEMP.
RISE = 58°F |
KW'S =
20.0 |
WARRANTY
= 1 yr. limited |
DIMENSIONS:
