CONSTRUCTION:
18 ga. steel cabinet with
powder coated finish and control compartment housing a master terminal board
with a hinged and latched access door, simplifying wiring, installation &
maintenance. Product Companies -
Markel and Raywall
HEATING ELEMENT:
Spiral fin steel element
with continuously brazed steel fins formed to allow side draw through air flow.
OVERHEAT PROTECTION:
All units come equipped
with automatic reset type limit to de-energize the heater should an over-temperature
situation occur.
FAN and MOTOR:
• Totally enclosed,
1-speed 1-phase, permanently lubricated, thermally protected motors with unit
bearings on 3 KW - 20 KW models.
• Totally enclosed, 2-speed, 1-phase, permanently lubricated, thermally
protected motors with sleeve bearings on 25 KW - 50 KW models.
• Fan over-ride purges unit of residual heat at shutdown
LOUVER ASSEMBLY:
• Louvers are individually
adjustable for directional control of air flow up to 15° from straight horizontal
• Optional difusers available for down flow (vertical discharge) applications
TEMPERATURE CONTROLS:
• Units with model
numbers ending in CA1 are factory wired for low voltage controls
• 25 KW through 50 KW units are designed for two stage heating operation
INTSTALLATION:
• Unit Heaters can
be mounted for horizontal or vertical discharge
• 5100 Series suggested for applications up to 6,000 feet.
• 9' RECOMMENDED MOUNTING HEIGHT
• Control Voltage - 240 / 208
|
240
VOLT
|
| TYPE
=
Wall / Ceiling |
VOLT
= 240
|
TEMP.
RISE = 26°F |
| AIR
THROW = 12'
|
CFM
= 400 |
BTU
/ H = 11,262 |
| PHASE
= 1 |
AMPS
= 13.7 |
WEIGHT
(lbs) =
25 |
| MOTOR
ENCLOSURE
= TE |
KW
= 3.3 |
WARRANTY
= 1 yr. limited |
|
208 VOLT
|
| TYPE
=
Wall / Ceiling |
VOLT
=
208 |
TEMP.
RISE = 26°F |
| AIR
THROW = 12'
|
CFM
= 400 |
BTU
=
8,532 |
| PHASE
= 1 |
AMPS
=
11.9 |
WEIGHT
(lbs) =
25 |
| MOTOR
ENCLOSURE
= TE |
KW
= 2.5 |
WARRANTY
= 1 yr. limited |
DIMENSIONS:
- A = 17 3/4"
- B = 14 15/32"
- C = 6 1/2"
