SD Exhaust Fan w/ Shutters 1 Speed 16 inch 2370 CFM Direct Drive S16-E1

Model:
S16-E1
Brand:
Canarm
Build Time:
1 to 3 Business Days ?
Ships By:
FedEx Ground

Build Time

The product Build Time you see represented on this site is only a typical number of days the manufacturer states it needs to build the product(s) when ordered. Build times are based on business days (excludes weekends & holidays).

The build time does not include the time it will take to ship the order to you (the customer). If an order has multiple items and comes from multiple warehouses, you may receive part of your order on one day, and then receive the remaining part(s) of your order at a later date.

*Please be aware that seasonal demand of certain equipment may cause build times to run longer than what is typical.

Highly Recommended Items:

LIST: $394.26
Only $260.97
Quantity Unit Price You Save
6-9 3%
10+ 5%

Canarm / LFI’s standard fans follow a tradition of quality in design, materials and construction. All our standard fans are developed to be efficient and economically priced. Fans are available in single, two and variable speed models. All variable speed standard fans use an energy efficient variable speed, dual voltage motor and blade combination.

To determine the proper Canarm/LFI fan for your applications, use the following formula.

Number of cubic feet in room / Number of minutes per air change = Required C.F.M. Capacity

*INSIDE WALL INSTALLATION

Features:

Available in 8” to 42” sizes.
Single, two and variable speed models are available.
All fans use a totally enclosed, thermally protected motor.
The rugged steel welded box housing has a durable powder coated finish.
Aluminum louver shutters are supported by long life nylon bushings
(30”, 36” & 42” have PVC louvers).
8” - 24” models have heavy wire chrome plated OSHA guards on intake side of fan.
30”, 36” & 42” models have grey powder coated guards.
All fans are shipped completely assembled.

*NOTE: The motor Full Load Amperage ratings are meant to be used as a General guideline only. The ratings are from the primary motor supplier. These amperage ratings may vary slightly if a different motor supplier is used. It is also possible that a motor manufacture may modify / improve / update a motor in which the amperage rating will change slightly.


 

 

 

 

 

 

DIMENSIONS (inches):

a = 21-1/4"
b = 17"
c = 6"
d (center to center) = 20"
e = 18-3/4"
n = 4 Louvers

Model No.:
S16 -E1
Voltage:
115
Warehouse:
New York
Type:
Exhaust Fans
Amps:
1.8
Blade Material:
Heavy-Gauge Aluminum
Blade Size (Inches):
16
No. of Blades:
3
CFM Low:
-
CFM High:
2370
Decibels (dBA):
668 @ 5ft
Dimension Inches:
Width: 21-1/4" Depth: 6" Height: 21-1/4"
Hertz:
60
Drive Type:
Direct
Horsepower:
1/4
Limited Warranty:
1 Year Limited
Motor Type:
TE
RPM High:
1625
Phase:
1
Speed(s):
1
Weight lbs.:
33
Notice: Manufacturer's products features and specifications are subject to change without notice.
California Residents: warning WARNING- This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.

QUESTIONS & ANSWERS

Ask a Question
  • We want to install this in our food truck. Will it stay on if it gets really hot up in the hood? What size do you recommend. Our truck is 21’x8’. How much room is required up in the hood to fit this unit.

    You will want to contact us directly regarding the fan needed.  Call 866.727.1060

  • Is this fan explosion proof I was considering it for a 14 by 24 by 8 foot paint booth

    This fan is NOT explosion proof. You will want to look at the AX14-4 or the SD18-XPF

  • what size wall shutter fan is required for a garage 50 ft wide x 50 ft long x 18ft high

    You have a total of 45,000 cubic feet of air in this space.  6500 CFM would exchange the air approx. one time per 7 minutes, which is fairly typical for your application. You may want to look at two fans doing roughly 3500 CFM each.

  • My building is 36x64 with a 16 foot sidewall is this fan big enough to exhaust my space?

    The cubic feet of your area is approx. 37,000. This fan would only exchange the air in your building approx. once every 15 to 17 minutes.  It is typically suggested to exchange the air in a warehouse type buildiing once every 7 minutes or less.  This would require approx. 5,300 CFM.

  • Is the motor brushless?

    Yes. The motor on this fan is brushless. This is a PSC type motor.