Skip to main content

STXD Explosion Proof Upblast Centrifugal Roof Exhaust 10 inch 1445 CFM Direct Drive STXD10PH1ASEXP

Model:
STXD10PH1ASEXP
Brand:
Soler & Palau
Build Time:
17 Weeks ?
Ships By:
Freight

Build Time

The product Build Time you see represented on this site is only a typical number of days the manufacturer states it needs to build the product(s) when ordered. Build times are based on business days (excludes weekends & holidays).

The build time does not include the time it will take to ship the order to you (the customer). If an order has multiple items and comes from multiple warehouses, you may receive part of your order on one day, and then receive the remaining part(s) of your order at a later date.

*Please be aware that seasonal demand of certain equipment may cause build times to run longer than what is typical.

Highly Recommended Items:

LIST: $2,650.27
Only $1,414.81

Model STXD direct drive fans are designed to exhaust air in high static pressure applications to 1-1/2”. The aluminum exterior provides an attractive appearance. The non-overloading backward inclined wheel with its higher static pressure capability makes this unit suitable for either ducted or non-ducted applications. Its roof or wall mounting permits location near the area to be ventilated, allowing short duct runs and more efficient operation. Direct drive units use smaller diameter wheels with lower rpm's, resulting in low sound levels and quiet operation. They have no belts or fan bearings to maintain or adjust and consequently require very little maintenance.

Isolation of the motor from the air stream and the high velocity vertical (roof) or horizontal (wall) air discharge make the Model STXD ideally suited for the removal of dirty, contaminated and/or high temperature air from processes and buildings. Typical applications include restaurant hoods and similar kitchen exhaust ventilation, fume and smoke removal, laboratory fume hood exhaust and chemical process exhaust.

MOTOR CLASSIFICATION
Class 1, Division 1, Group D
Class 2, Division 2, Group F & G

FEATURES
Temperature rating up to 300 degrees F
Spun aluminum exterior
Direct drive units have low sound levels and quiet operation
Curved non-overloading backward inclined wheel for efficiency at higher static pressures
Roof or sidewall mounting options
AMCA tested
Miami-Dade NOA, Florida Product Approval and Texas Department of Insurance Licensing available upon request

Model No.:
STXD10PH1ASEXP -115
Voltage:
115 / 208 - 230
Warehouse:
Florida
Made In U.S.A.:
Yes
Type:
Explosion Proof Fans
Amps:
6.6 / 3.3
Blade Material:
Aluminum
Blade Size (Inches):
10
CFM High:
1445
Construction:
Aluminum
Hertz:
60
Drive Type:
Direct
Horsepower:
1/3
Limited Warranty:
1 Year Limited Motor
Motor Type:
Explosion Proof
RPM High:
1725
Phase:
1
Weight lbs.:
115
Notice: Manufacturer's products features and specifications are subject to change without notice.
California Residents: warning WARNING- This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.

QUESTIONS & ANSWERS

Ask a Question
  • is t this unit 110 or 220

    This unit can be purchased as 115 volt, 208 volt or 230 volt. You can choose the voltage using the drop-down menu.