STXD Upblast Centrifugal Roof Exhaust 10 inch 979 CFM Direct Drive STXD10RHULMM1AS

Soler & Palau
Build Time:
7 to 10 Business Days ?
Ships By:

Build Time

The product Build Time you see represented on this site is only a typical number of days the manufacturer states it needs to build the product(s) when ordered. Build times are based on business days (excludes weekends & holidays).

The build time does not include the time it will take to ship the order to you (the customer). If an order has multiple items and comes from multiple warehouses, you may receive part of your order on one day, and then receive the remaining part(s) of your order at a later date.

*Please be aware that seasonal demand of certain equipment may cause build times to run longer than what is typical.

Highly Recommended Items:

LIST: $1,210.63
Only $802.19

NOTE: Temperature Rating up to 300°

CONSTRUCTION: *You can not use a damper or birdscreen in a grease application.

Isolation of the motor from the air stream and the high velocity vertical (roof) or horizontal (wall) air discharge make the Model STXD ideally suited for the removal of dirty, contaminated and / or high temperature air from processes and buildings. Typical applications include restaurant hoods and similar kitchen exhaust ventilation, fume and smoke removal, laboratory fume hood exhaust and chemical process exhaust.

The non overloading wheel with its higher static pressure capability makes this unit suitable for either ducted or non-ducted applications. Its roof or wall mounting permits location near the area to be ventilated, allowing short duct runs and more efficient operation. They have no belts or fan bearings to maintain or adjust and consequently require very little maintenance.

Heavy-gauge aluminum for extra strength with pre-punched mounting holes
Neoprene isolators for reduction of vibration and sound
Cover easily removed for quick access to motor compartment
Enclosed,Ventilated motor compartment isolates motor from exhaust air
Water tight conduit tube for easy electrical connection
Disconnect is standard
Lifting lugs for easy and safe placement on roof
Stainless steel exterior fasteners

Centrifugal Wheel
All aluminum backward inclined wheel
Non-overloading for safe operation in ducted systems
Dynamically balanced for smooth operation
Speed Controllable Motors
Standard motors are single speed, speed controllable and drip-proof
All motors are rated for continuous duty
Disconnect is standard with single speed drip-proof motors
Motors ship mounted as standard

Speed Controllable Motors
Standard motors are single speed, speed controllable and drip-proof.
All motors are rated for continuous duty.
Disconnect is standard with single speed drip-proof motors.
Motors ship mounted as standard.

    Solid State Speed Control:

    Control is matched to the motor and blower wheel to allow continuous reduction in performance allowing adjustments of airflow for system balancing. CFM is reduced in direct proportion to motor speed reduction. Speed control is only available for single phase. Exhauster performance can be controlled from the ventilated area.



    A = 18 inches
    B = 25-5/16 inches
    C = 28-5/8 inches
    D = 20-5/16 inches

    Roof Opening = 13-1/2 inches
    Curb O.D. = 16-1/2 inches

    Model No.:
    115 / 208 / 230
    Made In U.S.A.:
    Exhaust Fans
    Blade Material:
    Blade Size (Inches):
    CFM High:
    Drive Type:
    Limited Warranty:
    1 Year Limited Motor
    RPM High:
    Weight lbs.:
    Notice: Manufacturer's products features and specifications are subject to change without notice.
    California Residents: warning WARNING- This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please visit


    Have a Question?

    Be the first to ask a question about this.

    Ask a Question