Commercial 56 Inch White Reversible Ceiling Fan w/ 36" Downrod Variable Speed 20500 CFM CP56S

CP White Commercial Forward/Reverse Ceiling Fan w/ 36" Downrod 56 inch 20500 CFM CP56S, [product-type] - Industrial Fans Direct
Model:
CP56S
Brand:
Canarm
Build Time:
3 to 5 Business Days ?
Ships By:
FedEx Ground

Build Time

The product Build Time you see represented on this site is only a typical number of days the manufacturer states it needs to build the product(s) when ordered. Build times are based on business days (excludes weekends & holidays).

The build time does not include the time it will take to ship the order to you (the customer). If an order has multiple items and comes from multiple warehouses, you may receive part of your order on one day, and then receive the remaining part(s) of your order at a later date.

*Please be aware that seasonal demand of certain equipment may cause build times to run longer than what is typical.

Highly Recommended Items:

LIST: $126.69
Only $84.50

The Canarm CP Series ceiling fans are an inexpensive and highly efficient way to circulate air in the workplace. Everyone knows that hot air rises. Buildings with ceilings higher than 8 feet have a significant amount of stored heat at the ceiling that will transfer through the roof and be lost and wasted. The higher the ceiling, the greater amount of energy loss potential from the stored heat at the top of the building. This heat/energy loss can be significantly reduced resulting in lower energy bills by using the CP series Ceiling Fans.

Please Note: These fans are for a "J hook" installation only. Please review the installation manual under the downloads tab to verify if this installation type is right for your application.

 There can be as much as 25 degrees Fahrenheit difference between floor and ceiling. Heaters may be set to work when the floor level temperature is 65ºF +/-, when there is already 80 degrees air at the ceiling ready to be recycled. The use of Canarm Ceiling Fans in this situation will move this hot air down from the ceiling to create a more even air temperature throughout the building resulting in a more comfortable working environment and potentially reducing your energy bills by as much as 30%.

Fan Features:
All metal construction
Painted steel blades with curved ends deliver maximum airflow over wide areas
36" Down rod with safety cable
Reversible motor for both winter heat destratification and summer time cooling
Impedance protected motor with sealed ball bearings
Assembly required
12" Lead wires
UL listed

*Features of fan speed control (CNFRMC5)
Control has a 5 amp rating and can be used with all forward and reverse models
Up to 4 fans can operate on a single control.
A forward and reverse slide switch is provided to change direction of the fan from updraft to downdraft
Speed adjustment is infinite
Minimum speed adjustment screw
All controls are designed to fit a standard electrical switch box
Mount in a dry location such as the control room

Ceiling Fan Choice And Layout

Ceiling fan choice and layout is based on ceiling height and the floor area of the building.  As the height of the ceiling increases, larger and more powerful fans are required to achieve destratification.

The floor air coverage of a fan will be greater the higher the ceiling of the building. This is because of the natural cone shape of the air pattern produced by the fan. (See Figure 1) (HPWP models have increased floor area coverage because of more powerful motors).

Canarm provides two types of fans: The traditional ceiling fan, low cost, good performance, great for dry locations.  The HPWP high performance, water resistant models - great for more demanding applications with high moisture or greater air velocity requirements.  Use the following chart to choose the correct fan size/type and quantity to suit your requirements. (See Figure 2)

HPWP_Fig2

 

Model No.:
CP56S
Voltage:
120
Warehouse:
New York
Type:
Ceiling Fans
Amps:
0.9
Blade Material:
Steel
Blade Size (Inches):
56
No. of Blades:
3
CFM High:
20500
Hertz:
60
Drive Type:
Direct
Limited Warranty:
5 Year Limited
RPM High:
310
Phase:
1
Speed(s):
Variable
Weight lbs.:
19
Notice: Manufacturer's products features and specifications are subject to change without notice.
California Residents: warning WARNING- This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.

QUESTIONS & ANSWERS

Ask a Question
  • Is there a formula to tell how may "CFM" size I may need for my space?

    Ceiling fan choice and layout is based on ceiling height and the floor area of the building.  As the height of the ceiling increases, larger and more powerful fans are required to achieve destratification. The floor air coverage of a fan will be greater the higher the ceiling of the building. This is because of the natural cone shape of the air pattern produced by the fan. (See Figure 1) (HPWP models have increased floor area coverage because of more powerful motors). Canarm provides two types of fans: The traditional ceiling fan, low cost, good performance, great for dry locations.  The HPWP high performance, water resistant models - great for more demanding applications with high moisture or greater air velocity requirements.  Use the following chart to choose the correct fan size/type and quantity to suit your requirements. (See Figure 2) (figure 2) Example:

    What size & how many fans would be required for a building that is 100 feet wide x 200 feet long & has as ceiling height of 16 feet? By using the chart above, we see that a ceiling height of 16 feet requires a CP56 (56” fan). Floor Area of the building = 100 feet wide x 200 feet long = 20,000 square feet. From the chart, we know that the Fan Floor Area Coverage of the CP56 model is 1100 square feet at a 16 foot ceiling height. Therefore, the number of fans required = Floor Area of building / Fan Floor Area Coverage:   20,000 square feet / 1100 square feet = 18 fans. A typical layout for this building is illustrated below.

    An additional fan should be used about 10 feet in front of each shipping door to act as an air curtain & reduce heating bills in the winter.

  • how many wire are needed for the reverse action?

    If these instructions were not included with the fan, please contact the manufacturer (Canarm) at 800-267-4427 for wiring instruction and other technical questions.

  • Can this be flush mounted to a truss?

    This fan can not be flush mounted to a truss.  It must be used with the standard 16" downrod, or the optional 8" downrod.