Stationary Dust Collector & Fume Exhauster 550 CFM w/ 5 inch x 10 ft. Hose 32110-044

Model:: 32110-044

Brand:: Howden American Fan

Build Time:: Please Call ?

Ships By:: Freight

Only $1,210.90

Qty:

This low-cost fume exhauster is not only ideally suited for collecting smoke and fumes from all welding, brazing and soldering operations; it is necessary for the good health of your employees. Industry has come to recognize the importance of good ventilation of fumes from the above operations. The fumes emitted from welding certain raw metals and coated metals such as galvanized, are not only a nuisance but a hazard to the health of the welders.

The Model FC draws these fumes away at their source and exhausts them to the outside. This assures both the comfort and the health of the welder and cuts down on fatigue. This unit, because it traps the fumes at their source, eliminates the need for additional high-volume ventilation units which increase heating expenses in the winter months.

FEATURES
Highly efficient cast aluminum and steel plate blowers
10 feet of 5" flex hose
Fume hood
Adjustable discharge elbow
Rubber vibration mount
Non-sparking aluminum construction

Model No.:: 32110 -044

Voltage:: 230

Warehouse:: Ohio

Type:: Fume Extractors

CFM High:: 550

Construction:: Cast Aluminum

Dimension Inches:: Width: 15" Depth: 21.75" Height: 14.875"

Horsepower:: 1/2

Limited Warranty:: 2 Year Limited

Motor Type:: TEFC

RPM High:: 3450

Phase:: 1

Weight lbs.:: 65

Notice: Manufacturer's products features and specifications are subject to change without notice.

California Residents: warning

WARNING- This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.

Informational Manual

QUESTIONS & ANSWERS

Ask a Question

can you have more than one hose connected at one time?

Thank you for your question. Yes, you can branch off with a "Y" connector and connect 2 hoses, as long as you don't exceed the static pressure rating for the unit. Please see the link below for pressure ratings for this unit, as well as the "Y" branch and other accessories:

https://cdn.shopify.com/s/files/1/0972/5538/files/DustCollectorsFumeExhausters.pdf?v=1515445068
1. What are the dimensions of the fume hood? 2. Can I get a longer 5" hose, up to 15'? 3. Is it best to mount the unit near the fume hood, or where the exhaust exits the building?

Yes. Up to an additional 10' length of 5" hose can be added. The blower unit can be placed at either end depending on what is necessary for your installation requirements.

Stationary Dust Collector & Fume Exhauster 550 CFM w/ 5 inch x 10 ft. Hose 32110-044

Build Time

QUESTIONS & ANSWERS

Similar Products To Consider