Skip to main content

Shutter Mounted Wall Exhaust Fans 8 Inch w/ 9' Cord & Plug 300 CFM Variable Speed 8SF4V30C

Model:
8SF4V30C
Brand:
Hessaire
Build Time:
3 to 4 Weeks ?
Ships By:
FedEx Ground

Build Time

The product Build Time you see represented on this site is only a typical number of days the manufacturer states it needs to build the product(s) when ordered. Build times are based on business days (excludes weekends & holidays).

The build time does not include the time it will take to ship the order to you (the customer). If an order has multiple items and comes from multiple warehouses, you may receive part of your order on one day, and then receive the remaining part(s) of your order at a later date.

*Please be aware that seasonal demand of certain equipment may cause build times to run longer than what is typical.

Highly Recommended Items:

Only $96.12

All variable speed fans will run at a single speed unless used with a controller. Please see our control options here for a control that pairs with this fan.

Shutter Mounted Exhaust Fan is perfect for removing excess heat, moisture, dust and odors from virtually any residential or commercial space. Applications include: workshops, welding rooms, restaurants, factories, warehouses, barns, and greenhouses. This wall mounted exhaust fan features aluminum blades, OSHA compliant wire guards, and automatic gravity shutters that open and close in conjunction with the operation of the fan. The completely enclosed motor is thermally protected and permanently lubricated. This fan comes fully assembled and ready to install out of the box.

FEATURES
High efficiency, quiet operating
Variable speed capable models for use with variable speed controls Note: control not included with fan, please see highly recommended items for a compatible control
Sizes 8” - 24” pre-wired with 9ft grounded cord—115v
Guards feature industrial gray polyester powder coating, OSHA spacing
“Rounded” guard design prevents excessive vibration, adds rigidity
Heavy duty aluminum shutters with reinforced corners
Weather stripping on louvers provide maximum seal, prevents rattling
Motor Type: TEAO, IP55 rating
Fans are UL705 certified

DIMENSIONS
11"W x 8"D x 11"H

ROUGH IN OPENING
8.5” x 8.5”

Model No.:
8SF4V30C
Voltage:
115
Warehouse:
Alabama
Type:
Exhaust Fans
Amps:
0.6
Blade Material:
Aluminum
Blade Size (Inches):
8
CFM High:
300
Decibels (dBA):
5.37 sones @ 10'
Dimension Inches:
Width: 11" Depth: 8" Height: 11"
Hertz:
60
Drive Type:
Direct
Horsepower:
1/25
Limited Warranty:
2 Year Limited
Motor Type:
Totally Enclosed
Phase:
1
Speed(s):
Variable
Weight lbs.:
17
Notice: Manufacturer's products features and specifications are subject to change without notice.
California Residents: warning WARNING- This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.

QUESTIONS & ANSWERS

Ask a Question
  • I'm looking for an exhaust fan to remove heat from my home garage. 20'x24' is this the correct size for that application Thank you

    Thank you for your question.  Based on the size of your garage, you will need a larger unit that moves about 600-800 CFM to turn the air over every 5-7 minutes.  This unit is a great option.  It is rated at 800 CFM, but is variable speed so can be turned down if desired - https://www.industrialfansdirect.com/products/ves-shutter-exhaust-fan-12-inch-800-cfm-variable-speed-ves12-j-d-manufacturing

    This is also a good option, and has a plug in cord and integrated speed switch for easy installation - https://www.industrialfansdirect.com/products/vpes-outdoor-rated-shutter-exhaust-fan-w-cord-12-inch-1100-cfm-3-speed-vpes12-j-d-manufacturing

  • What is the cutout dimension for this fan?

    Rough-in dimensions for this fan is 8.5" x 8.5"

  • I think this fan will be a good fit for my application. 6’x8’ compressor/dust collector enclosure attached to back of shop. 8’ walls. I have t111 siding / 16 on center 2x4 walls / 1/2” drywall. I’m currently running wire (drywall not installed yet). Do you recommend a height placement for this fan? It will have an 8’ ceiling and insulated. I’m trying to figure out where to place outlet for this. It sounds like it’s a 9’ cord but the closer the better. Does this get fastened to the siding only? I wasn’t sure if it would need blocking on inside seeing it will fit between studs. And do you sell a thermostat for this? I didn’t see a manual for this so if that is available please let me know. Thanks

    This fan is meant to mount from the inside of your building.  The flange has mounting holes.  Here is a thermostat that will work wit this unit:  VC012-C

  • there is a 9 foot cord that you plug in right, not shown in picture

    That is correct.  There is a 9' cord and plug included.

  • The demensions listed are 11" x 11" is that to the outside of the mounting flange?

    Yes. That is correct. This is the total outside dimensions.

  • is there a detailed specifications document, ex. dimensions etc..?

    No. Detailed specifications will be added to these fans in the near future.

  • can this be used with a thermostat

    Yes.  A thermostat can be used with most any fan since it is really only an On / Off switch based on the temperature.