Skip to main content

AX Wall Exhaust Fan 30 inch 8000 CFM Direct Drive AX30-2

Model:
AX30-2
Brand:
Canarm
Build Time:
10 to 15 Business Days ?
Ships By:
Freight

Build Time

The product Build Time you see represented on this site is only a typical number of days the manufacturer states it needs to build the product(s) when ordered. Build times are based on business days (excludes weekends & holidays).

The build time does not include the time it will take to ship the order to you (the customer). If an order has multiple items and comes from multiple warehouses, you may receive part of your order on one day, and then receive the remaining part(s) of your order at a later date.

*Please be aware that seasonal demand of certain equipment may cause build times to run longer than what is typical.

Highly Recommended Items:

LIST: $1,128.89
Only $830.24
Quantity Unit Price You Save
3-5 4%
6+ 7%

The Canarm AX series exhaust fans are a sturdily constructed, direct drive, horizontal discharge fan that is typically used for general ventilation of factories, garages, warehouses and other industrial or commercial buildings. The AX fans are available in multiple single-speed variations as well as two-speed and variable speed models. The AX series housings are constructed of heavy duty aluminum with built in shutters that automatically open when the fan starts and gravity closes when the fan stops.

*Photo is a representation of the fan. Number of Louvers vary with fan size*

FEATURES

AX30 - 8 Louvers

Single Speed

Have a rugged, sturdily constructed housing made from all aluminum extrusions

Louvers open automatically when the fan starts up and close when the fan stops

30” fans and larger have powder coated guards

Motors are mounted on heavy gauge welded steel rod motor mounts that have a Bright Zinc finish

Totally enclosed air over motor with overload protection

Fans come fully assembled and 100% of fans are tested for proper operation before shipping.

 

DIMENSIONS
A = 35-1/4"
B = 32-3/4"
C = 5"
D = 13"

Framing Dims: 33" x 33"

Model No.:
AX30 -2
Voltage:
115 / 230
Warehouse:
New York
Type:
Exhaust Fans
Amps:
4.4 / 2.2
Blade Material:
Aluminum
Blade Size (Inches):
30
No. of Blades:
3
CFM High:
8000
Decibels (dBA):
82 @ 5'
Dimension Inches:
Width: 35.75" Depth: 18" Height: 35.75"
Hertz:
60
Drive Type:
Direct
Horsepower:
1/3
Limited Warranty:
1 Year Limited
Motor Type:
TE
RPM High:
1100
Phase:
1
Speed(s):
1
Weight lbs.:
72
Notice: Manufacturer's products features and specifications are subject to change without notice.
California Residents: warning WARNING- This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.

QUESTIONS & ANSWERS

Ask a Question
  • Do you have a variable speed version? Of the 8000cfm? Is there a way to make it variable If not?

    Unfortunately, there is not a variable speed version of this fan. The motor on this fan can not be ran as a variable speed.

  • What RPM does the Ax30-2 operate at? What is the decibel rating for the AX30-2? Does the AX30-2 have aluminum shutters? What is the difference between the AX series fans and the SD series?

    This fan runs at 11 RPM and has a dBA level of 82 @ 5 Ft.. The AX fans are built from extruded aluminum, whereas the SD series fans have a housing that is powder coated steel.

  • What should the rough opening be?

    The rough-in opening for the AX30-2 fan should be 33-1/4" x 33-1/4"

  • What is the temperature rating for this fan?

    Like most fan motors, the AX30-2 is rated for 104 deg. F ambient temperature.