AX Wall Exhaust Fan 1 Speed 30 inch 8000 CFM Direct Drive AX30-2
The product Build Time you see represented on this site is only a typical number of days the manufacturer states it needs to build the product(s) when ordered. Build times are based on business days (excludes weekends & holidays).
The build time does not include the time it will take to ship the order to you (the customer). If an order has multiple items and comes from multiple warehouses, you may receive part of your order on one day, and then receive the remaining part(s) of your order at a later date.
*Please be aware that seasonal demand of certain equipment may cause build times to run longer than what is typical.
|Quantity||Unit Price||You Save|
The Canarm AX series exhaust fans are a sturdily constructed, direct drive, horizontal discharge fan that is typically used for general ventilation of factories, garages, warehouses and other industrial or commercial buildings. The AX fans are available in multiple single-speed variations as well as two-speed and variable speed models. The AX series housings are constructed of heavy duty aluminum with built in shutters that automatically open when the fan starts and gravity closes when the fan stops.
*INSIDE WALL INSTALLATIONFeatures:
Sturdily constructed from all-aluminum extrusions.
8” - 24” models have heavy wire chrome plated
OSHA guards on intake side of fan.
30”, 36” & 42” models have grey powder coated guards.
Totally enclosed air over motor with overload products.
The shutter mounted direct drive exhaust fan installs on inside wall.
It eliminates need for external framing and shutter.
*NOTE: The motor Full Load Amperage ratings are meant to be used as a General guideline only. The ratings are from the primary motor supplier. These amperage ratings may vary slightly if a different motor supplier is used. It is also possible that a motor manufacture may modify / improve / update a motor in which the amperage rating will change slightly.
A = 35-3/4 in.
B = 32-3/4 in
C = 5 in.
D = 13 1/4 in. (APPROXIMATION DEPENDENT ON MOTOR MANUFACTURER)
- Model No.:
- AX30 -2
- 115 / 230
- New York
- Exhaust Fans
- 4.4 / 2.2
- Blade Material:
- Blade Size (Inches):
- No. of Blades:
- CFM High:
- Decibels (dBA):
- 82 @ 5 ft
- Dimension Inches:
- Width: 35.75" Depth: 18.25" Height: 35.75"
- Drive Type:
- Limited Warranty:
- 1 Year Limited
- Motor Type:
- RPM High:
- Weight lbs.:
Notice: Manufacturer's products features and specifications are subject to change without notice.
California Residents: WARNING- This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
QUESTIONS & ANSWERSAsk a Question
Do you have a variable speed version? Of the 8000cfm? Is there a way to make it variable If not?
Unfortunately, there is not a variable speed version of this fan. The motor on this fan can not be ran as a variable speed.
What RPM does the Ax30-2 operate at? What is the decibel rating for the AX30-2? Does the AX30-2 have aluminum shutters? What is the difference between the AX series fans and the SD series?
This fan runs at 11 RPM and has a dBA level of 82 @ 5 Ft.. The AX fans are built from extruded aluminum, whereas the SD series fans have a housing that is powder coated steel.
What should the rough opening be?
The rough-in opening for the AX30-2 fan should be 33-1/4" x 33-1/4"
What is the temperature rating for this fan?
Like most fan motors, the AX30-2 is rated for 104 deg. F ambient temperature.