Skip to main content

AX Wall Exhaust Fan 36 inch 10000 CFM Direct Drive AX36-7

Model:
AX36-7
Brand:
Canarm
Build Time:
10 to 15 Business Days ?
Ships By:
Freight

Build Time

The product Build Time you see represented on this site is only a typical number of days the manufacturer states it needs to build the product(s) when ordered. Build times are based on business days (excludes weekends & holidays).

The build time does not include the time it will take to ship the order to you (the customer). If an order has multiple items and comes from multiple warehouses, you may receive part of your order on one day, and then receive the remaining part(s) of your order at a later date.

*Please be aware that seasonal demand of certain equipment may cause build times to run longer than what is typical.

Highly Recommended Items:

LIST: $1,005.47
Only $768.20
Quantity Unit Price You Save
3-5 4%
6+ 7%

The Canarm AX series exhaust fans are a sturdily constructed, direct drive, horizontal discharge fan that is typically used for general ventilation of factories, garages, warehouses and other industrial or commercial buildings. The AX fans are available in multiple single-speed variations as well as two-speed and variable speed models. The AX series housings are constructed of heavy duty aluminum with built in shutters that automatically open when the fan starts and gravity closes when the fan stops.

*Photo is a representation of the fan. Number of Louvers vary with fan size*

FEATURES

AX36 - 9 Louvers

Single Speed

These models have a rugged, sturdily constructed housing made from all aluminum extrusions

Louvers open automatically when the fan starts up and close when the fan stops

30” fans and larger have powder coated guards

Motors are mounted on heavy gauge welded steel rod motor mounts that have a Bright Zinc finish

Totally enclosed air over motor with overload protection

Fans come fully assembled and 100% of fans are tested for proper operation before shipping.

 

DIMENSIONS
A = 41-1/4"
B = 38-3/4"
C = 5"
D = 12"

Framing Dims: 39" x 39"

Model No.:
AX36 -7
Voltage:
115 / 230
Warehouse:
New York
Type:
Exhaust Fans
Amps:
6.6 / 3.3
Blade Material:
Aluminum
Blade Size (Inches):
36
No. of Blades:
3
CFM High:
10000
Decibels (dBA):
72 @ 5ft
Dimension Inches:
Width: 41.25" Depth: 17" Height: 41.25"
Hertz:
60
Drive Type:
Direct
Horsepower:
1/2
Limited Warranty:
1 Year Limited
Phase:
1
Speed(s):
1
Weight lbs.:
88
Notice: Manufacturer's products features and specifications are subject to change without notice.
California Residents: warning WARNING- This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.

QUESTIONS & ANSWERS

Ask a Question
  • I need an exhaust fan for welding in a 2400sq ft building. How many sq ft will this fan handle?

    If your building has 15' ceilings this fan will ventilate the building once every 3 minutes approximately.  You may want to go to our CFM Calulator to see what size fan you will want.

  • does this fan have a back draft damper

    The AX series exhaust fans include the gravity shutter / damper as seen in the photo.

  • Could this fan be used in a paint booth?

    Thank you for your question.  We typically recommend our explosion proof fans if you will be spraying any solvent based primers/bases or clears in your booth.  

    https://www.industrialfansdirect.com/products/vik3613hl-u

    If you are only spraying water based products, the unit you chose will work.  However, it is out of stock at the moment, here are some good alternatives:

    https://www.industrialfansdirect.com/products/sd36-ec
    https://www.industrialfansdirect.com/products/vik3613-w

  • Will the dampers keep rain from coming in the building?

    Thank you for your question.  Yes, the dampers are designed to keep rain and dust from entering your interior space while the fan is off.  They are gravity operated, so extreme directional wind from a severe weather event could potentially open them and allow rain in.

  • THE SHUTTER BOX OUTER DIMENSION IS 38 3/4X 38 3/4, CAN I MAKE THE OPENING THAT SIZE

    It is suggested to make the rough-in opening at least 1/4" larger than the dimension of the fan box.

  • why do they require the opening to be 1/2" bigger

    Different manufacturers use different rough-in requirements. You may be able to rough-in 1/4" larger and be fine.  We always suggest receiving the fan before making any openings.

  • MAINTENANCE

    These fans do not require much in the way of maintenance.  If in a dusty environment, the fan blades, guard and motor may need to be dusted for best performance.