FloAire Ceiling or Wall Mount Utility Ventilator w/ Grill 500 CFM Variable Speed CFA500FA

FloAire Ceiling or Wall Mount Utility Ventilator w/ Grill 500 CFM Variable Speed CFA500FA
Model:
CFA500FA
Brand:
FloAire
Build Time:
5 to 7 Business Days ?
Ships By:
FedEx Ground

Build Time

The product Build Time you see represented on this site is only a typical number of days the manufacturer states it needs to build the product(s) when ordered. Build times are based on business days (excludes weekends & holidays).

The build time does not include the time it will take to ship the order to you (the customer). If an order has multiple items and comes from multiple warehouses, you may receive part of your order on one day, and then receive the remaining part(s) of your order at a later date.

*Please be aware that seasonal demand of certain equipment may cause build times to run longer than what is typical.

Highly Recommended Items:

Only $328.91
Quantity Unit Price You Save
6-9 3%
10+ 5%

FEATURES & BENEFITS

Extremely quiet operation.
Acoustically insulated housing.
Integral back draft damper.
Easily removable blower assembly.
Resilient anti-vibration mounts isolate motor for smooth operation.
Thermally protected fan motor.
Integral plug type disconnect.
Eight position mounting bracket included.
Can be ceiling or wall mounted.

DESCRIPTION

Fan shall be galvanized steel, ceiling mounted, forward curved, direct drive, exhaust fan. Optional inline adapter is available to convert to inline type.

CERTIFICATIONS

Fan shall be listed by Underwriters Laboratories. Fan shall bear the AMCA certified ratings seal for sound and air performance.

CONSTRUCTION

HOUSING

The fan housing shall be constructed of 20 gauge galvanized steel and include 1/2" thick acoustic insulation inside. The fan housing shall include an automatic backdraft damper on the discharge side of the fan located within the duct connector. Two, 8-position mounting brackets shall be provided for ease of installation. The fan may be installed in ceiling or wall size permitting. Decorative grille included with fan.

WHEEL

The fan wheel shall be forward curved, dynamically balanced, polymeric centrifugal wheel for quiet, efficient performance. The wheel(s) shall be firmly attached to the motor shaft with set screws.

MOTOR

Standard 115 volt, open drip motors shall be permanently lubricated, rated for continuous duty and thermally protected. Motors shall be mounted on vibration isolators to minimize noise and vibration. The motor disconnect shall be internal and of the plug type.

Dimensions (Inches):

A- 21-1/2

B -12-1/4

C - 11-3/4

D - 23-1/4

E - 14

F - 18-1/2

G - 4-1/2

WT - 34 lbs

 

FloAire certifies that Model CFA100FA thru CFA1500FA shown herein are licensed to bear the AMCA seal. The ratings shown are based on tests and procedures performed in accordance with with AMCA publication 211 and Publication 311, and comply with the requirements of the AMCA Certified Rating Program. UL Listed for use over bathtubs and showers when connected to a GFCI protected branch circuit

Model No.:
CFA500FA
Voltage:
115
Warehouse:
Various
Type:
Duct Inline Fans
Amps:
2.2
CFM High:
500
Construction:
Galvanized Steel
Dimension Inches:
Width: 21-1/2" Depth: 12-1/4" Height: 11-3/4"
Hertz:
60
Drive Type:
Direct
Horsepower:
.31
Limited Warranty:
2 Years Limited
RPM High:
810
Phase:
1
Speed(s):
Variable
Watts High:
207
Weight lbs.:
34
Notice: Manufacturer's products features and specifications are subject to change without notice.
California Residents: warning WARNING- This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.

QUESTIONS & ANSWERS

Ask a Question
  • what size is duct work, picture shows round and specs show 4.5x18.5 square , also will this take smell out of room 12x12 fast , and dpoes it need to be vented outside with 4x18 duct or can we reduce and if so yes what is the smallest reduction recommended

    This is a rectangular opening to be ducted (4.5" x 18.5").  Usually this will be transitioned to a round ducting by the installing contractor.