CWD Centrifugal Wall Exhaust 12 inch 1583 CFM CWD12MM1AS

Centrifugal Sidewall Exhauster, direct drive.

These sidewall exhausters are used to exhaust relatively clean air from a variety of industrial, commercial and institutional buildings such as machinery and equipment rooms, storage areas, office buildings, restaurants, retail stores, schools and similar buildings.

The non-overloading centrifugal wheel with its high static pressure capability, makes it suitable for either ducted or non-ducted applications.

The spun aluminum exterior provides a pleasing appearance, weather proof construction and resistance to corrosion. The low silhouette design is less noticeable on the building exterior and the removable dome provides easy access to the fan interior for service and cleaning.

Direct drive units use smaller diameter wheels, resulting in low sound levels and quiet operation. They have no belts or fan bearings to maintain or adjust and consequently require very little maintenance.

CONSTRUCTION
Housing
Spun aluminum dome for weather protection and attractive appearance.
Ventilated motor compartment with motor out of air stream for long trouble-free service.
Dome easily removes for access to motor compartment.
Weather-tight construction with aluminum birdscreen.
Round duct connection provided at wheel inlet.

Centrifugal Wheel
Non-overloading backward inclined for safe operation in ducted systems.
Statically and dynamically balanced for smooth, quiet operation.

Motors
Speed controllable motors available on most models.
Single speed open drip-proof are standard.
Plug disconnect switch standard with single speed drip-proof motors.
UL 705 Listed Power Roof Ventilator label assures electrical reliability

ACCESSORIES
Solid State Speed Control:
Control is matched to the motor and blower wheel to allow continuous reduction in performance allowing adjustments of airflow for system balancing. CFM is reduced in direct proportion to motor speed reduction. Exhauster performance can be controlled from the ventilated area.

NOTE: Temperature rating up to 140° F

DIMENSIONAL DATA

A = 30 inches
B = 15-1/2 inches
C = 13-15/16 inches
D = 3 inches
E = 17-1/2 inches (rough-in hole size)
G = 14 inches

Model No.:: CWD12MM1AS

Voltage:: 115

Warehouse:: Florida, California

Made In U.S.A.:: Yes

Type:: Exhaust Fans

Blade Size (Inches):: 12

CFM High:: 1583

Hertz:: 60

Drive Type:: Direct

Horsepower:: 1/4

Limited Warranty:: 1 Year Limited

Motor Type:: ODP

RPM High:: 1100

Phase:: 1

Weight lbs.:: 80

Notice: Manufacturer's products features and specifications are subject to change without notice.

California Residents: warning

WARNING- This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.

Installation Manual

Information Manual

Submittal