PV Dryer Vent Booster Fan w/ Current Sensor 153 CFM DBF-100XC
The product Build Time you see represented on this site is only a typical number of days the manufacturer states it needs to build the product(s) when ordered. Build times are based on business days (excludes weekends & holidays).
The build time does not include the time it will take to ship the order to you (the customer). If an order has multiple items and comes from multiple warehouses, you may receive part of your order on one day, and then receive the remaining part(s) of your order at a later date.
*Please be aware that seasonal demand of certain equipment may cause build times to run longer than what is typical.
If you have a dryer with long or complicated duct runs, this kit will increase dryer efficiency. the pv100x has been specifically designed to handle dryer boosting applications when overcoming long or complicated duct runs. this system helps save on drying time, moisture build-up, wear and tear on your dryer, and helps save on your electrical bill. the centrifugal blade design is able to overcome extreme resistance from the most challenging installations. the fan offers a fully enclosed motor, which ensures a long, trouble free life; thus making it the right choice for enhancing the performance of your clothes dryer. once the system is installed you will no longer waste time, energy or unnecessary wear and tear on your dryer.
Pressure switches are a viable method of fan activation and a good solution for many installations. the pressure switch senses the pressure differential in the duct created by the dryer operation, thus activating the fan. conversely, when the dryer is deactivated, the pressure switch senses this differential and the fan is deactivated. s & p does not mount the pressure switches to the fan so that the most advantageous location for the pressure switch can be determined by the installer for ease of maintenance and accessibility. the pressure switch should not be installed too far from the dryer's exhaust outlet (no more than 15 feet optimally), this decreases the risk of not having sufficient detectable pressure.This premium dryer booster kit includes the following components:
PV-100x 4" duct boosting fan (153 CFM)
air pressure sensing switch with electronic cycle timing board
fan mounting bracket
the PV series of duct exhaust or supply fans have been specifically designed for simple installation and many years of maintenance free operation. the PV fans can be mounted at any point along the duct. the totally enclosed motor design allows the PV fans to operate in high moisture, lint and dust laden air. the PV fans are ideally suited for a wide range of residential, commercial and industrial exhaust and intake ventilation applications. among typical applications would include the following:
warm or cool air transfer
kitchen range hoods
laundry rooms (dryer boosting)
bars & restaurants
make-up air applications
welding fume extraction
workshops & smoking areas
manufactured from high grade pressed galvanized steel, with black baked enamel coating.
extra long inlet and discharge collars make installation quick and trouble free.
supplied with a strong galvanized steel mounting bracket.
supplied with a remote mounting, pre-wired wiring junction box.
Wheel / impeller:
backward curved centrifugal type.
factory matched to an external rotor motor and dynamically balanced to eliminate vibration.
totally enclosed permanent spit capacitor start and run external rotor motors.
115v 60hz (single phase) electrical connection.
permanently sealed, self lubricating precision ball bearings.
safety thermal overload protection cut-out (automatic reset type).
all models are suitable for working air streams up to 140
all models have been independently safety tested by under writers laboratories, inc. and are UL and CUL listed.
independently safety tested by intertek laboratories, and are ETL listed.
independently tested for airflow performance. the PV range is licensed to bear the AMCA seal for air performance.
the PV product range is certified by the home ventilating institute (HVI) for air performance.
*Performance certified is for installation type d-ducted inlet, ducted outlet. performance ratings do not include the effect of appurtenances (accessories). speed (rpm or rps) shown is nominal. performance is based on actual speed of test.
Dimensional data: (inches)
a = 7 5/8
b = 1
c = 9 1/2
d = 3 7/8
e = 6 11/16
f = 8 7/8
g = 6 1/16
h = 10 13/16
i = 3 1/4
- Model No.:
- DBF -100XC
- Made In U.S.A.:
- Duct Inline Fans
- CFM High:
- Corrosion Resistant Galvanized Steel
- Dimension Inches:
- Width: 9.5" Depth: 7.625" Height: 10 13/16"
- Drive Type:
- Limited Warranty:
- 5 Year Limited
- Motor Type:
- RPM High:
- Watts High:
- Weight lbs.:
Notice: Manufacturer's products features and specifications are subject to change without notice.
Questions & Answers
Have a Question?
Be the first to ask a question about this.