Industrial DryFan Desiccant Dehumidifier 150-Pint 267 CFM EPD150

Model:
EPD150
Brand:
ECOR PRO
Build Time:
5 to 7 Business Day ?
Ships By:
FedEx Ground

Build Time

The product Build Time you see represented on this site is only a typical number of days the manufacturer states it needs to build the product(s) when ordered. Build times are based on business days (excludes weekends & holidays).

The build time does not include the time it will take to ship the order to you (the customer). If an order has multiple items and comes from multiple warehouses, you may receive part of your order on one day, and then receive the remaining part(s) of your order at a later date.

*Please be aware that seasonal demand of certain equipment may cause build times to run longer than what is typical.

Highly Recommended Items:

Only $2,308.50
Quantity Unit Price You Save
3-5 4%
6+ 7%

 Introducing the world’s smallest commercial grade desiccant dehumidifiers.

Introducing the ECOR PRO EPD150 - unique, patented, compressor-less, bucket-less desiccant dehumidifiers for residential and commercial drying applications. Designed to work anywhere, safely all day and every day. With our newly innovated and patented DryFan Zeolite Technology, moisture can be vented outside with the unit placed in any direction, as well as eliminating water containers, pumps and hoses that were included in traditional obsolete refrigerant dehumidifiers. The EPD150 desiccant dehumidifiers can work upside down or on their sides to enable easy mounting to ceilings and walls. Traditional refrigerant dehumidifiers are prone to stop working in cold environments, while ECOR PRO EPD150 desiccant dehumidifiers can pull moisture even at -4°F room temperature. Compact and lightweight, almost a third of the size of comparable commercial refrigerant dehumidifiers, making the units easy to carry and transport from job site to job site. The 3-hole system of EPD150 uses only one internal fan to create two air flows internally. 15% of the process air (or damp air in) that you need to dry is turned back on itself after passing through the desiccant wheel. This air is used to dry the wheel again to be vented out as saturated exhausted wet air. This is the air that is vented away like a tumble dryer hose (only 3.15 inches in diameter). Three hole comes from having Process Air-In, Process Air-Out & Exhaust ducts.


Read Here About How COVID-19 Slowed by DryFan Technology

Typical applications include; water damage restoration, hydroponics, moisture and rust protection, warehouse storage, food and timber drying, exotic car garages, hotels, offices, workshops, large homes and food storage.

Highly Compact – Perhaps the smallest 74 Pint dehumidifier in the market.

Dust Filter – The desiccant industrial dehumidifier benefits from a simple reticulated dust filter in metal frame that can be shaken clean or easily replaced to prevent dust particles entering the unit and impeding performance.

Easy Repair – Maintenance and eventual repair have been thought through with an easy to remove cover that gives easy access to replace cord sets or warn parts by a qualified persons quickly. Prolonging the lifetime of the dehumidifier.

On Four Feet – Anti scratch plastic feet.

Carrying Handle – Easy to carry by one person. The handle can be removed if the product is being installed. The handles also protect the dehumidifier duct flanges if in transit.

Humidistat Connection – There is no integral humidistat but one can be added very simply. A military standard connector is on the front of the unit. To add this use the remote humidistat EPHUM220. This will turn the dehumidifier on and off automatically.

Duct Air-In & Out – The dehumidifier has all ducts fitted with flanges to allow ducting to be added with 125mm / 5″ hard or flexible ducting.

Wet Air Exhaust – There is one internal fan. Fan does not produce water. The moisture is vented away allowing it to work in colder temperatures. The moisture is purged from the system by 15% of the process air so will dry with slight negative pressure.

“Three Hole System” – The system is classed as a “three hole” system due to the one inlet and two outlets. With slight duct configuration the hole system can be used as a four hole industrial dehumidifier but needs accurate duct flow measurement.

Power Supply – 110V supply 60Hz

Auto Reset – If there is an interruption to the power supply, the dehumidifier will continue to operate as soon as the power has been returned. Perfect in locations where the there is a “dirty” power supply that can affect other electronically controlled products.

All Metal ConstructionAll metal with epoxy paint finish heat treated for strength inside & outside. Designed for longevity.

5m / 15′ Power Cord – no need to join cables when placed for instance in crawl spaces or lofts in the home for example.

Ecor Pro’s research shows that the EPD150 will be four to seven times faster at drying buildings at low temperatures than a traditional compressor dehumidifiers

 

SPECIFICATIONS

Max Extract - 35L - 74pt
Duct Sizes - 80mm (3.0")-125mm (5")
Humidistat Inside / Humidistat Option - No / Yes
Carrying Handle / Water Container / Power Cord Length - Yes / No / 15"
Works From DC-AC Coverter - Yes
Water Tank - No

 

Condensation, mold spots, loft condensation, moldy wardrobes, utility areas and bathrooms are all symptoms of excess humidity problems often originating from inside the home. Solving a humidity problem in one room is pointless - the issue tends to be in the whole home. In cold climates or winters, crawl spaces and basements can have excess moisture. This does not have an immediate noticeable effect but can damage especially any wooden construction unless dehumidified or protected with expensive protective coatings.


   

    Model No.:
    EPD150
    Voltage:
    120
    Type:
    Dehumidifier
    Amps:
    7.1
    CFM High:
    268
    Construction:
    Galvanized Steel
    Decibels (dBA):
    56 @ 3'
    Dimension Inches:
    Width: 13.86" Depth: 17.52" Height: 13.58"
    Hertz:
    60
    Limited Warranty:
    1 Year Limited
    Phase:
    1
    Speed(s):
    Single
    Watts High:
    850
    Weight lbs.:
    38.60
    Notice: Manufacturer's products features and specifications are subject to change without notice.
    California Residents: warning WARNING- This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.

    QUESTIONS & ANSWERS

    Have a Question?

    Be the first to ask a question about this.

    Ask a Question