NOTE: THIS ITEM IS MADE TO ORDER AND NOT RETURNABLE. 

Temperature Code T3 [329°F (200°C)] For Class I & II

FE2 heaters are CE Marked & ATEX Approved to Directive 94/9/EC for use in hazardous locations. They are designed for dry indoor industrial applications such as oil refineries, petrochemical plants, pulp and paper mills, hazardous waste storage facilities, wastewater treatment plants, etc., where specific explosive gases or dusts maybe present. IP55 rated units available.

All FE2 heaters utilize the VacuCore® liquid-to-air heat exchanger. The induced vacuum within the sealed core provides greater efficiency, even distribution of heat across the face of the exchanger, and a faster warmup. When necessary, the entire core can be safely and easily replaced with a new exchanger or core.

The heater core assembly is contained in a sturdy, epoxy-coated, 12-gauge steel cabinet which also carries the motor and fan assembly. Adjustable louvres allow directional control of the airflow. A narrow gap, two-piece fan guard is provided to shield all moving parts. All fasteners are zinc plated for corrosion protection.

All aspects and details of the FE2 are subjected to exhaustive technical analysis and testing during design and development and are manufactured under a registered quality assurance program. As a result, they have consistently proven their safety and reliability.

Features;
Approvals:
ATEX Approved (Directive 2014/34/EU)
Hazardous Location Classification :
CE : DEMKO 10 ATEX 0910365X
Ex : II 2 G, Ex d IIB T3 Gb
EAC : 1 Ex d IIB T3 Gb X

Enclosures: NEMA Type 7 & 9. For dry, indoor use only. Do not immerse in water. Do not store or use in areas exposed to rain or snow

Motor Type: Explosion-proof. Thermally protected. Permanently lubricated ball bearings 1425 RPM @ 50 Hz or 1725 RPM @ 60 Hz

Fan: Aluminum blade. Steel spider and hub with 19 mm (3/4") bore

Fan Guard: Split design with close wire spacing. Meets latest EN standards

Mounting Holes: Four 16 mm (5/8") diameter holes at top of heater

Heating Elements: Three long-life, low watt-density, high grade metal-sheathed elements

Temperature High-Limit: Automatic reset type, snap-action bimetal, open on temperature rise. Rated 100,000 cycles at 10 amps, handles 0.130 amps

Control Circuit: 115 V, 0.130 amps, 15 VA. (Grounded)

Control Transformer: Multi-tap primary, 115 V secondary, 50 VA

Contactor: 75 amp. Rated for 1,000,000 mechanical operations. 120 V, 15 VA coil (separately fused - protected)

Heat Transfer Fluid: Long life formulated Propylene Glycol and water, freeze protected to -45ºC (-49ºF)

Cabinet Material: 12-gauge (0.075" / 2 mm) steel. Epoxy coated with five-stage pretreatment, including iron phosphate

Core: Steel with integral aluminum fins, vacuum charged and hermetically sealed

Conduit Material: Heavy wall, 0.122" (3 mm) steel-plated

Overpressure Protection: Preset 690 kPa (100 psig) seep pressure relief valve, aluminum body, not field serviceable

Operational Temperature Limitations: -20°C to 40°C (-4°F to 104°F) and -50°C to 40°C for “B” units

Ingress Protection: IP55 on select models

Optional Built-in Thermostat:

Explosion-proof. 2ºC to 28ºC (36ºF to 82ºF)

Explosion-proof XTE 412. 0ºC to 40ºC (43ºF to 104ºF)