TD Mixvent Standard Exhaust Fan Kit 6 inch 293 CFM KIT-TD-150
The product Build Time you see represented on this site is only a typical number of days the manufacturer states it needs to build the product(s) when ordered. Build times are based on business days (excludes weekends & holidays).
The build time does not include the time it will take to ship the order to you (the customer). If an order has multiple items and comes from multiple warehouses, you may receive part of your order on one day, and then receive the remaining part(s) of your order at a later date.
*Please be aware that seasonal demand of certain equipment may cause build times to run longer than what is typical.
*PICTURE IS A REPRESENTATION OF A KIT ONLY - COMPONENTS INCLUDED IN KIT ARE LISTED BELOW.IMPORTANT: If venting in an non-insulated attic space, or in a cold climate, insulated flexible duct is strongly recommended for condensation issues.
The TD-MIXVENT fan kits provide all the hardware needed to complete a simple in-line ducted ventilation installation. The kit includes a powerful TD in-line fan, exterior and interior grills. The TD-MIXVENT fan kit is the ideal solution for any simple in-line ducted fan installation. These are Energy Star Rated and UL Listed.
This TD-MIXVENT Kit Includes the Following Components:
- 1 TD150 6" Exhaust Fan
- 1 Plastic round grill (PG-150)
- 1Air exhaust grill (PER-150W)
- 1 Integral Mounting Bracket
*IMPORTANT: If venting in an non-insulated attic space, or in a cold climate, insulated flexible duct is strongly recommended for condensation issues.
The TD-Mixvent series of in-line duct fans have been specially designed to maximize the airflow performance with minimal noise levels within the smallest and most compact of casing sizes. This makes it the ultimate solution for small to medium sized ventilation installations which require a high air-flow to pressure ratio and occupy only the minimum space possible. Example: false ceiling voids, cupboards and many other limited space environments. All models include a "removable body" feature that enables the motor-impeller assembly to be completely removed or replaced without the need to interfere with the attached ducting. The TD fans are ideally suited for a wide range of residential, commercial and industrial exhaust and intake ventilation applications. Typical applications would include the following.
- Warm or Cool Air Transfer
- Kitchen Range Hoods
- Utility Rooms
- Locker Rooms
- Conference Rooms
- Bars & Restaurants
- Make-Up Air Applications
- Welding Fume Extraction
- Spot Ventilation
- Equipment Cooling
- Workshops & Smoking Areas
Models 100X, 150 and 200X are manufactured in tough reinforced plastic, the fan duct connection flanges are manufactured from reinforced plastic, except for the 200 and 200x which are constructed from epoxy-polyester coated metal.
The impeller blades for models 100x, 150 and 200x are molded in tough ABS plastic. Model 200 is metal.
Model 100x is Single-phase, 120V 60Hz, shaded pole induction asynchronous motor in die cast aluminum. All motors include direct two speed connection and are also suitable for voltage speed control.
- Class 1 electrical insulation
- IP 44 Protection
- Class B Motor Insulation
- Safety auto reset Thermal Overload Protection (fuse type)
- Self-lubricating sleeve bearings.
- Suitable for working air streams up to 104° F (40°C).
FT622 ASHRAE 62.2 Bath Fan Ventilation Control - The FT622 is designed to replace bathroom fan and light switches and provide both functions with one easy operation. By using a microprocessor to monitor and control operation, the FT622 delivers a precise amount of ventilation, and is a simple solution to meet ASHRAE 62.2 in conjunction with the TD-Mixvent or PC Premium Choice Fan. There are two settings on the control, Ventilation and Delay. The Ventilation setting allows the user to set the number of minutes per hour the fan should run. The Delay setting allows the user to set the number of minutes the fan should run after the bathroom light has been turned off. The Delay setting provides additional run time for the fan to complete the remaining necessary ventilation after use.
FT247 PROGRAMMABLE FAN TIMER - The FT247 offers easy programming for your bathroom fan ventilation needs. Simply set what time you want the fan to turn on and off and what day or days you want the fan to run. It is recommended to use the FT247 with a TD-Mixfent Fan or PC Premium Choice Fan.
- Provides 7 ON and 7 OFF events per day
- LCD display
- Rechargeable battery back-up
- Push button activation
- Note: Do not use with fluorescent lamp ballasts
dimensional data: (inches)
x = 8 3/8
a = 18 1/4
b = 7 7/8
c = 5 9/16
d = 5 13/16
e = 4 3/8
f = 5 1/8
g = 3 1/8
h = 2 1/4
- Model No.:
- KIT -TD -150
- Duct Inline Fans
- Blade Size (Inches):
- CFM High:
- Dimension Inches:
- Width: 7 7/8" Depth: 18.25" Height: 8 3/8"
- Limited Warranty:
- 7 Year Limited
- Weight lbs.:
Notice: Manufacturer's products features and specifications are subject to change without notice.
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.