Mixvent 4 Inch Exhaust Fan Kit with 4 inch Exhaust Fan 135 CFM KIT-TD100X1
The product Build Time you see represented on this site is only a typical number of days the manufacturer states it needs to build the product(s) when ordered. Build times are based on business days (excludes weekends & holidays).
The build time does not include the time it will take to ship the order to you (the customer). If an order has multiple items and comes from multiple warehouses, you may receive part of your order on one day, and then receive the remaining part(s) of your order at a later date.
*Please be aware that seasonal demand of certain equipment may cause build times to run longer than what is typical.
|Quantity||Unit Price||You Save|
*PICTURE IS A REPRESENTATION OF A KIT ONLY - COMPONENTS INCLUDED IN KIT ARE LISTED BELOW.IMPORTANT: If venting in an non-insulated attic space, or in a cold climate, insulated flexible duct is strongly recommended for condensation issues.
The TD-MIXVENT fan kits provide all the hardware needed to complete a simple in-line ducted ventilation installation. The kit includes a powerful TD in-line fan, exterior and interior grills. The TD-MIXVENT fan kit is the ideal solution for any simple in-line ducted fan installation.
These are UL listed!This TD-MIXVENT Kit Includes the Following Components:
*IMPORTANT: If venting in an non-insulated attic space, or in a cold climate, insulated flexible duct is strongly recommended for condensation issues.
The TD-Mixvent series of in-line duct fans have been specially designed to maximize the airflow performance with minimal noise levels within the smallest and most compact of casing sizes. This makes it the ultimate solution for small to medium sized ventilation installations which require a high air-flow to pressure ratio and occupy only the minimum space possible. Example: false ceiling voids, cupboards and many other limited space environments. All models include a "removable body" feature that enables the motor-impeller assembly to be completely removed or replaced without the need to interfere with the attached ducting. The TD fans are ideally suited for a wide range of residential, commercial and industrial exhaust and intake ventilation applications. Typical applications would include the following.
Warm or Cool Air Transfer
Kitchen Range Hoods
Bars & Restaurants
Make-Up Air Applications
Welding Fume Extraction
Workshops & Smoking Areas
Models 100X, 150 and 200X are manufactured in tough reinforced plastic, the fan duct connection flanges are manufactured from reinforced plastic, except for the 200 and 200x which are constructed from epoxy-polyester coated metal.
The impeller blades for models 100x, 150 and 200x are molded in tough ABS plastic. Model 200 is metal.
Model 100x is Single-phase, 120V 60Hz, shaded pole induction asynchronous motor in die cast aluminum. All motors include direct two speed connection and are also suitable for voltage speed control.
Class 1 electrical insulation
IP 44 Protection
Class B Motor Insulation
Safety auto reset Thermal Overload Protection (fuse type)
Self-lubricating sleeve bearings.
Suitable for working airstreams up to 104° F (40°C).
FT622 ASHRAE 62.2 Bath Fan Ventilation Control - The FT622 is designed to replace bathroom fan and light switches and provide both functions with one easy operation. By using a microprocessor to monitor and control operation, the FT622 delivers a precise amount of ventilation, and is a simple solution to meet ASHRAE 62.2 in conjunction with the TD-Mixvent or PC Premium Choice Fan. There are two settings on the control, Ventilation and Delay. The Ventilation setting allows the user to set the number of minutes per hour the fan should run. The Delay setting allows the user to set the number of minutes the fan should run after the bathroom light has been turned off. The Delay setting provides additional run time for the fan to complete the remaining necessary ventilation after use.
FT247 PROGRAMMABLE FAN TIMER - The FT247 offers easy programming for your bathroom fan ventilation needs. Simply set what time you want the fan to turn on and off and what day or days you want the fan to run. It is recommended to use the FT247 with a TD-Mixfent Fan or PC Premium Choice Fan.
Provides 7 ON and 7 OFF events per day
Rechargeable battery back-up
Push button activation
Note: Do not use with fluorescent lamp ballasts
A = 11 15/16
B = 6 15/16
C = 4 1/8
D = 3 13/16
E = 3 15/16
F = 3 9/16
G = 3 1/8
H = 2 1/8
- Model No.:
- KIT -TD100X1
- Duct Inline Fans
- Blade Size (Inches):
- CFM High:
- Dimension Inches:
- Width: 7 3/8" Depth: 11 15/16" Height: 6 15/16"
- Limited Warranty:
- 7 Year Limited
- RPM High:
- Watts High:
- Weight lbs.:
Notice: Manufacturer's products features and specifications are subject to change without notice.
California Residents: WARNING- This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
QUESTIONS & ANSWERSAsk a Question
What diameter is the inlet and outlet duct?
Thank you for your question. You will find all the dimensional drawings in thier catalog below. The model you asked about is the TD-100. Thank you.
There are no product dimensions provided?
There are product dimensions if you scroll further down the Product Details tab.
how many sones is this?
This fan is listed at 1.7 sones