King LPW Large ComfortCraft Designer Pick-A-Watt Wall Heater 15355 BTU 240V LPW2445T-S2-WD-R

Model:
LPW2445T-S2-WD-R
Brand:
King Electric Manufacturing
Build Time:
6 to 8 Weeks ?
Ships By:
FedEx Ground

Build Time

The product Build Time you see represented on this site is only a typical number of days the manufacturer states it needs to build the product(s) when ordered. Build times are based on business days (excludes weekends & holidays).

The build time does not include the time it will take to ship the order to you (the customer). If an order has multiple items and comes from multiple warehouses, you may receive part of your order on one day, and then receive the remaining part(s) of your order at a later date.

*Please be aware that seasonal demand of certain equipment may cause build times to run longer than what is typical.

LIST: $885.17
Only $540.65

King redefines comfort with a sleek and modern new architectural design. Offering higher output than our industry leading PAW heater. King’s exclusive dual Pic-A-Watt steel fin elements allow customers to select from a range of wattage options, tailoring the heater to an area’s specific heating requirements. With up to 4500W, this is our most popular large wall heater, used in both residential and commercial applications. Standard with a 3-position Heat/Fan/Off Switch and a fan delay to help dissipate heat from the high-mass steel plate fin elements thereby prolonging heater life and increasing energy efficiency. The high quality built-in thermostat has degrees on the label so temperature selection is easy and accurate.

Features

Motor: Heavy-duty, cast iron, unit bearing, permanently lubricated with 20cc oil reservoir, 1440 RPM. Enclosed impedance protected with intake air cooling motor for increased bearing life.

Fan: High efficiency, dynamically balanced 5-blade aluminum fan. 185 CFM.

Thermostat: 1-Pole built-in thermostat 45-80°F operating range.

Elements: Element assemblies shall consist of three steel sheathed heating tubes in a furnace-brazed, plate-finned, block design. Each sheathed tube shall contain coiled Ni-Chrome wire, embedded in an insulator of Magnesium Oxide. The element assembly shall provide up to eight (8) possible wattage configurations available for selection during field installation. The use of external resistors, diodes, or other weak links to obtain multiple wattages will not be accepted.

Thermal Overload: Heaters shall be equipped with King’s patented thermal overload Smart Limit Protection®, which disconnects elements and motor in the event normal operating temperatures are exceeded. If thermal overload trips due to abnormal operating temperatures, thermal overload shall remain open until manually reset by turning the heater off for 15 minutes.

Fan / Heat / Off Switch: 3-position switch provides heating and summer fan-only operation. The DPST off switch provides a “positive off” that disconnects all ungrounded conductors.

Wall-box: 20 gauge electro-galvanized steel with factory installed ground-wire. Minimum 4”clearance to floors and 6”to sidewalls. Zero clearance to combustibles in the wall. Recommended 10” clearance to floors and 16” to sidewalls.

Grill: 20 gauge steel finished in a gloss white, powder-coated paint.

Options: Retrofit grill, and surface wall-box.

Approvals: cULus

Proudly Made in the USA

Original Pic-A-Watt® Element

 

Model No.:
LPW2445T -S2 -WD -R
Voltage:
240
Warehouse:
Washington
Made In U.S.A.:
Yes
Type:
Heaters
Amps:
18.8
Blade Material:
Aluminum
BTU:
15355
CFM High:
185
Construction:
Steel
Dimension Inches:
Width: 14-1/2" Depth: 3-3/4" Height: 21-3/4"
Limited Warranty:
5 Year Limited
RPM High:
1440
Watts High:
4500
Weight lbs.:
19
Notice: Manufacturer's products features and specifications are subject to change without notice.
California Residents: warning WARNING- This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.

QUESTIONS & ANSWERS

Ask a Question
  • Do you sell a heat selection and control button/switch for a King Electric LPW 2045T The heat button/switch broke off

    You will want to contact King Electric directly for this part.  Please call 206.762.0400

  • Why does the red light come on?

    The LPW ComfortCraft does not have a red light. Did you mean to ask about the LPW ECO2S? That model has a red light that indicates high/low operation.