AirFlo Explosion Proof Radial Pressure Blower 4 inch Inlet / 4 inch Outlet 345 CFM at 1" SP 1 Phase
The product Build Time you see represented on this site is only a typical number of days the manufacturer states it needs to build the product(s) when ordered. Build times are based on business days (excludes weekends & holidays).
The build time does not include the time it will take to ship the order to you (the customer). If an order has multiple items and comes from multiple warehouses, you may receive part of your order on one day, and then receive the remaining part(s) of your order at a later date.
*Please be aware that seasonal demand of certain equipment may cause build times to run longer than what is typical.
|Quantity||Unit Price||You Save|
CW Rotation Only
Designed for use in situations requiring moderate CFM movement against relatively high static pressure systems. Excellent for fume exhaust, mounted on dust collectors, non-abrasive material conveying, vehicle exhaust removal in garages and fire departments, air source for air knives, and combustion air for gas burners.
Cast aluminum housing and wheels are naturally non-sparking and meet AMCA Type B spark resistant construction.
Round outlets and inlets facilitate connection to standard pipe and duct diameters with slip fit connections or flange to flange.
Six housing sizes and multiple wheel diameters provide a wide range of available performance ratings.
Suitable for use in airstreams to a maximum of 150°F.
Most sizes available in clockwise or counter-clockwise rotation with eight different discharge positions.
Standard Construction meets AMCA Type C spark resistant requirements with an Explosion Proof Motor
Class I, Division 1, Group D
Class II, Division 1, Group F&G
*NOTE - All models run at 3450 RPM.
NOTE: This product is non-returnable and cannot be cancelled.
|PERFORMANCE DATA (Static Pressure)
|1" SP||3" SP|
|345 CFM||242 CFM|
DIMENSIONS (vary with motor) Length = 21", Width = 15", Height = 16"
C =1 1/4"
D = 3 3/4"
F = 6"
G = 4 1/4"
H = 5 1/2"
J = 3 1/8"
M = 4 1/8"
N = 1 3/8"
O = 4 1/2"
P = 5 1/4"
R = 6 1/4"
S = 4 3/4"
T = 1"
U = 3 1/2"
AA = 4"
CC = 14"
DD = 4"
FF = 9 1/2"
HH = 7 7/8"
JJ = 9 1/2"
- Model No.:
- NHADP8 -C -1E
- 115 / 230
- Explosion Proof Fans
- Blade Size (Inches):
- CFM Low:
- CFM High:
- Decibels (dBA):
- 80 @ 5'
- Dimension Inches:
- Width: 15" Depth: 21" Height: 16"
- Drive Type:
- Limited Warranty:
- 1 Year Limited
- Motor Type:
- Explosion Proof
- RPM High:
- Weight lbs.:
Notice: Manufacturer's products features and specifications are subject to change without notice.
California Residents: WARNING- This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
QUESTIONS & ANSWERSAsk a Question
I saw the fan is marked Class I, Division 1, Group D Class II, Division 1, Group F&G *NOTE - All models run at 3450 RPM. possible to have it T3C and thermistor for VFD application? possible to have a label with max/mn possible Hz indicated? possible to have motor datasheet and explosionproof certificate in advance to check with the customer if OK? Andrea
Explosion proof motors are not designed to be anything other than single speed (not variable speed).
Can we get these in 6"?
Here is a link to an explosion proof pressure blower unit with a 6" inlet and 5" outlet: https://www.industrialfansdirect.com/collections/explosion-proof-fans/products/nhadp10d-1e