Skip to main content

SD Exhaust Fan w/ Shutters 14 inch 2170 CFM Direct Drive S14-E1

Model:
S14-E1
Brand:
Canarm
Build Time:
10 to 15 Business Days ?
Ships By:
FedEx Ground

Build Time

The product Build Time you see represented on this site is only a typical number of days the manufacturer states it needs to build the product(s) when ordered. Build times are based on business days (excludes weekends & holidays).

The build time does not include the time it will take to ship the order to you (the customer). If an order has multiple items and comes from multiple warehouses, you may receive part of your order on one day, and then receive the remaining part(s) of your order at a later date.

*Please be aware that seasonal demand of certain equipment may cause build times to run longer than what is typical.

Highly Recommended Items:

LIST: $828.00
Only $368.98
Quantity Unit Price You Save
6-9 3%
10+ 5%

Canarm/LFI’s standard fans follow a tradition of quality in design, materials and construction. All our standard fans are developed to be efficient and economically priced. Fans are now available with EC motors allowing you to save up to 70% on energy costs. 

*Photo is a representation of the fan. Number of Louvers vary with fan size*

FEATURES

SD14 - 3 Louvers

Single, two and variable speed models are available

All fans use a totally enclosed, thermally protected motor

Rugged steel welded box housing has a durable powder coated finish

Aluminum louver shutters are supported by long life nylon bushings (30”, 36”, 42” & 48” have PVC louvers)

12” - 24” models have heavy wire chrome plated OSHA guards on intake side of fan

12" - 24" models now upgraded with tie bar shutters and magnets for quieter operation and superior seal!

30”, 36”, 42” & 48” models have grey powder coated guards

All fans are shipped completely assembled


DIMENSIONS 
A: 19 1/4"
B: 17"
C: 6"
D: (center to center) 18"
E: 16 3/4"
Framing dims: 17" x 17"

Model No.:
S14 -E1
Voltage:
115
Warehouse:
New York
Type:
Exhaust Fans
Amps:
2.7
Blade Material:
Heavy-Gauge Aluminum
Blade Size (Inches):
14
No. of Blades:
3
CFM High:
2170
Decibels (dBA):
67 @ 5ft
Dimension Inches:
Width: 19.25" Depth: 17" Height: 19.25"
Hertz:
60
Drive Type:
Direct
Horsepower:
1/4
Limited Warranty:
1 Year Limited
Motor Type:
TE
RPM High:
1625
Phase:
1
Speed(s):
1
Weight lbs.:
30
Notice: Manufacturer's products features and specifications are subject to change without notice.
California Residents: warning WARNING- This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.

QUESTIONS & ANSWERS

Ask a Question
  • How do you determine the cfm exchange rate? My building is 28x46x14 high walls and is an uninsulated steel building.

    Thank you for your question.  Linked below is a CFM calculator that you can use to determine the CFM you will need to exchange the air out of your space at a pre-determined interval.  You can see the graph below the calculator to determine what a good exchange rate is for your application.
     
    https://www.industrialfansdirect.com/pages/exhaust-fan-cfm-calculator-chart

  • Which way does the air flow when you turn it on? From inside out? Or outside in?

    The air travels from the motor side out through the shutter side.

  • Will the 16" Galvanized Hood GH-XF16-M fit correctly on the 14" direct drive exhaust fan S14-E1? It comes up as highly recommended items...

    The all weather hoods are not designed to fit to the fans.  These hoods are mounted on outside of building.  The GH-XF16-M is the recommended hood for this fan.

  • Is the motor side of fan on the outside of the building other words what is air flow direction

    Motor on this fan will be on inside of building.

  • How about energy bill?

    This fan only draws 1.8 full load amps.  Energy consumprion is quite low.

  • What are the rough an measurement I know the outside measurement but I need the inside measurement

    Rough-in opening for this fan is 17" x 17".  NOTE: We never recommend cutting your opening unitl the fan arrvies.  The manufacturer can change dimensions of fans without notice.