SD Explosion Proof 10 inch Wall Mount Exhaust Fan w/ Shutters 620 CFM SD10-XPF
Canarm / LFI's Explosion Proof Fans follow a tradition of quality in design, materials, and construction. Using our quality "Standard Fan" housing and motor mount as the basis for design, we have developed an efficient, economically priced Explosion Proof Fan. All Explosion Proof Fans have a single speed, dual voltage explosion proof motor that meets and conforms to the following standards:
CLASS I, GROUP C - Atmospheres containing ethyl ether, ethylene, gases or vapors of equivalent hazard.
CLASS I, GROUP D - Atmospheres such as acetone, ammonia, benzene, butane, cyclopropane, ethanol, gasoline, hexane, methane, natural gas, naphtha, propane, or gasses or vapors of equivalent hazard.
CLASS II GROUP F - Atmospheres containing carbonaceous dust, including carbon black, charcoal, coal, or coke dusts that have more than 8% total entrapped volatiles, or dusts that have been sensitized by other materials so that they present an explosion hazard.
CLASS II GROUP G - Atmospheres containing combustible dusts not included in group E or F, including flour, grain, wood, plastic and chemicals.
FEATURES:
- All fans use a totally enclosed, ball bearing motor with thermal overload protection.
- The motor mount is manufactured with heavy welded rods and has a powder coated finish.
- The fan blades are well-balanced, heavy gauge aluminum.
- The rugged steel welded box housing has a durable powder coated finish.
- Aluminum shutters are supported by long life nylon bushings.
- All fans are shipped completely assembled.
*NOTE: The motor Full Load Amperage ratings are meant to be used as a General guideline only. The ratings are from the primary motor supplier. These amperage ratings may vary slightly if a different motor supplier is used. It is also possible that a motor manufacture may modify / improve / update a motor in which the amperage rating will change slightly.
DIMENSIONS:
a = 15 1/4"
b = 17 1/2"
c = 4"
d (center to center) = 14"
e = 12 3/4"
n = 2
Â
- Model No.:
- SD10 -XPF
- Voltage:
- 115 / 230
- Warehouse:
- New York
- Type:
- Explosion Proof Fans
- Amps:
- 6.6 / 3.3
- Blade Material:
- Heavy-Gauge Aluminum
- Blade Size (Inches):
- 10
- No. of Blades:
- 3
- CFM High:
- 620
- Dimension Inches:
- Width: 15 1/4" Depth: 17 1/2" Height: 15 1/4"
- Hertz:
- 60
- Drive Type:
- Direct
- Horsepower:
- 1/3
- Limited Warranty:
- 1 Year Limited
- Motor Type:
- Explosion Proof
- RPM High:
- 1625
- Phase:
- 1
- Speed(s):
- 1
- Weight lbs.:
- 39
-
Notice: Manufacturer's products features and specifications are subject to change without notice.
-
California Residents:

QUESTIONS & ANSWERS
Ask a Question-
Is this the appropriate fan to exhaust a finsh room when spraying lacquer on wood products?
If you need an explosion proof exhaust fan, this exhaust fan unit should be appropriate. The CFM is something that you will need to determine is enough air exchange for your area. You may want to use the Fan CFM Calculator on our site for this.
-
can you add ductwork to back of fan
This type of exhaust fan is not designed for much static pressure, so duct work is not suggested to add to this fan.
-
Is this compatible for C1 D2 Group B applications?
We do not currently carry explosion proof equipment for Group B applications.
-
What is the warranty
This fan has a 1 year limited warranty.
-
What do you have in terms of explosion proof control switches for these exhaust fans.
Currently, we do not offer explosion proof On/Off switches or other controls.