SD Explosion Proof 18 inch Wall Mount Exhaust Fan w/ Shutters 3200 CFM SD18-XPF
Canarm / LFI's Explosion Proof Fans follow a tradition of quality in design, materials, and construction. Using our quality "Standard Fan" housing and motor mount as the basis for design, we have developed an efficient, economically priced Explosion Proof Fan. All Explosion Proof Fans have a single speed, dual voltage explosion proof motor that meets and conforms to the following standards:
CLASS I, GROUP C - Atmospheres containing ethyl ether, ethylene, gases or vapors of equivalent hazard.
CLASS I, GROUP D - Atmospheres such as acetone, ammonia, benzene, butane, cyclopropane, ethanol, gasoline, hexane, methane, natural gas, naphtha, propane, or gasses or vapors of equivalent hazard.
CLASS II GROUP F - Atmospheres containing carbonaceous dust, including carbon black, charcoal, coal, or coke dusts that have more than 8% total entrapped volatiles, or dusts that have been sensitized by other materials so that they present an explosion hazard.
CLASS II GROUP G - Atmospheres containing combustible dusts not included in group E or F, including flour, grain, wood, plastic and chemicals.
FEATURES:
- All fans use a totally enclosed, ball bearing motor with thermal overload protection.
- The motor mount is manufactured with heavy welded rods and has a powder coated finish.
- The fan blades are well-balanced, heavy gauge aluminum.
- The rugged steel welded box housing has a durable powder coated finish.
- Aluminum shutters are supported by long life nylon bushings.
- All fans are shipped completely assembled.
*NOTE: The motor Full Load Amperage ratings are meant to be used as a General guideline only. The ratings are from the primary motor supplier. These amperage ratings may vary slightly if a different motor supplier is used. It is also possible that a motor manufacture may modify / improve / update a motor in which the amperage rating will change slightly.
DIMENSIONS:
a = 23 1/4"
b = 20 1/2"
c = 6"
d (center to center) = 22"
e = 20 3/4"
n = 4
- Model No.:
- SD18 -XPF
- Voltage:
- 115 / 208 / 230
- Warehouse:
- New York
- Type:
- Explosion Proof Fans
- Amps:
- 6.6 / 3.1 - 3.3
- Blade Material:
- Heavy-Gauge Aluminum
- Blade Size (Inches):
- 18
- No. of Blades:
- 3
- CFM High:
- 3200
- Dimension Inches:
- Width: 23 1/4" Depth: 20 1/2" Height: 23 1/4"
- Hertz:
- 60
- Drive Type:
- Direct
- Horsepower:
- 1/3
- Limited Warranty:
- 1 Year Limited
- Motor Type:
- Explosion Proof
- RPM High:
- 1725
- Phase:
- 1
- Speed(s):
- 1
- Weight lbs.:
- 62
-
Notice: Manufacturer's products features and specifications are subject to change without notice.
-
California Residents:

QUESTIONS & ANSWERS
Ask a Question-
How is a fan like this powered? Is it as simple as plugging it into an outlet or would i need to run power to the unit?
This explosion proof fan is designed to be hard-wired. It does not come with acord and plug.
-
Can this fan be made variable speed?
No. This explosion proof fan is one speed only On / Off
-
Does Canarm carry replacement aluminum louvers for their SD18-XPF exhaust fan? If so, what is the cost? If not, are there any aftermarket parts that would fit this model? If so, would you please email me a photo and the cost of these? Thank you.
Yes, there is a louver replacement kit for this fan. The SK18 includes louvers, nylon pin bushings and left / right side channels. You will need to call this order in to 866.727.1060 since we do not currently offer this kit online.