SD Exhaust Fan w/ Shutters Variable Speed 24 inch 5050 CFM Direct Drive SD24-GVD
All variable speed fans will run at a single speed unless used with a controller. Please see our control options here for a control that pairs with this fan.
Canarm standard fans follow a tradition of quality in design, materials and construction. All our standard fans are developed to be efficient and economically priced. Fans are available in single, two and variable speed models. All variable speed standard fans use an energy efficient variable speed, dual voltage motor and blade combination.
FEATURES
Inside wall installation
Available in 8” to 42” sizes.
Single, two and variable speed models are available.
All fans use a totally enclosed, thermally protected motor.
The rugged steel welded box housing has a durable powder coated finish.
Aluminum louver shutters are supported by long life nylon bushings
(30”, 36” & 42” have PVC louvers).
8” - 24” models have heavy wire chrome plated OSHA guards on intake side of fan.
30”, 36” & 42” models have grey powder coated guards.
All fans are shipped completely assembled.
A = 29-1/4"
B = 16"
C = 6"
D (center to center) = 28"
E = 26-3/4"
N = 5
- Model No.:
- SD24 -GVD
- Voltage:
- 115 / 230
- Warehouse:
- New York
- Type:
- Exhaust Fans
- Amps:
- 6.4 / 3.2
- Blade Material:
- Galvanized Steel
- Blade Size (Inches):
- 24
- No. of Blades:
- 3
- CFM Low:
- 800
- CFM High:
- 5050
- Decibels (dBA):
- 72 @ 5 ft
- Dimension Inches:
- Width: 29 1/4" Depth: 16" Height: 29 1/4"
- Hertz:
- 60
- Drive Type:
- Direct
- Horsepower:
- 1/3
- Limited Warranty:
- 1 Year Limited
- Motor Type:
- TE
- RPM High:
- 1100
- Phase:
- 1
- Speed(s):
- Variable
- Weight lbs.:
- 56
-
Notice: Manufacturer's products features and specifications are subject to change without notice.
-
California Residents:

QUESTIONS & ANSWERS
Ask a Question-
can this fan have a tmer and t-stat ?
Thank you for your question. Yes, this fan can be controlled to turn on and off via a thermostat or timer.
Here is a link to our thermostats - https://www.industrialfansdirect.com/collections/controls/thermostats -
Is the motor single phase or 3 phase
1 Phase. The Specifications tab on the product page will offer this information and much more.
-
How many wires to I need to wire it to 220 volts? 3 or 4?
The wiring diagram for connecting to 220 Volt should be on the motor itself. Please contact the manufacturer (Canarm) at 800-267-4427 for further information.