SD Exhaust Fan w/ Shutters 1 Speed 36 inch 10000 CFM Direct Drive SD36-G1D

Quantity	Unit Price	You Save
3-5		4%
6+		7%

Canarm / LFI’s standard fans follow a tradition of quality in design, materials and construction. All our standard fans are developed to be efficient and economically priced.

To determine the proper Canarm/LFI fan for your applications, use the following formula.

Number of cubic feet in room / Number of minutes per air change = Required C.F.M. Capacity

*INSIDE WALL INSTALLATION

Features:
Available in 8” to 42” sizes.
All fans use a totally enclosed, thermally protected motor.
The rugged steel welded box housing has a durable powder coated finish.
PVC louvers shutters are supported by long life nylon bushings.
30”, 36” & 42” models have grey powder coated OSHA guards.
All fans are shipped completely assembled.

*NOTE: The motor Full Load Amperage ratings are meant to be used as a General guideline only. The ratings are from the primary motor supplier. These amperage ratings may vary slightly if a different motor supplier is used. It is also possible that a motor manufacture may modify / improve / update a motor in which the amperage rating will change slightly.

DIMENSIONS (inches):
A = 41-1/4"
B = 18"
C = 6"
D (Center to Center) = 40"
E = 38-3/4"
N = 20 Louvers

Model No.:: SD36 -G1D

Voltage:: 115 / 230

Warehouse:: New York

Type:: Exhaust Fans

Amps:: 6.6 / 3.3

Blade Material:: Heavy-Gauge Aluminum

Blade Size (Inches):: 36

No. of Blades:: 3

CFM High:: 10000

Decibels (dBA):: 72 @ 5ft

Dimension Inches:: Width: 41-1/4" Depth: 6" Height: 41-1/4"

Hertz:: 60

Drive Type:: Direct

Horsepower:: 1/2

Limited Warranty:: 1 Year Limited

Motor Type:: TE

RPM High:: 850

Phase:: 1

Speed(s):: 1

Weight lbs.:: 88

Notice: Manufacturer's products features and specifications are subject to change without notice.

California Residents: warning

WARNING- This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.

Instruction Manual

Specs

QUESTIONS & ANSWERS

Ask a Question

Does this fan run on 120 volt, single phase?

Thank you for your question. Yes, this fan can run on 120V single phase. It can also run on 240V single phase and there are instructions included with it to wire it accordingly.
I plan on using a 36" 10 000 CFM (SD36-G1D) in a spray booth roughly 10' x 10' x 8' high. Would this fan be too big for this application?

Thank you for your question. I think that 10,000 CFM will be too much for your application. According to our calculator, to turn the air over every 1 minute, you only need about 1000 CFM. However, in practice, you will need more than that. I would recommend our 24" variable speed unit. You can then have exrta capacity if needed, but could turn it down as well.

https://www.industrialfansdirect.com/products/ax-wall-exhaust-fan-variable-speed-24-inch-5500-cfm-direct-drive-ax24-1v-canarm

If you are spraying anything other than water based products in the booth, you will need an explosion proof fan. They are only offered in 1 speed however.

https://www.industrialfansdirect.com/products/ax-explosion-proof-18-inch-aluminum-wall-exhaust-fan-w-shutters-3200-cfm-ax18-4-canarm

With either unit, you will want to filter the air going into the fan as they will get fouled with whatever you are spraying very quickly. I would reccommend building a open sided box out of 2x4, attaching hepa style furnace air filters to the open sides, and securing it to the wall between your booth and the intake side of the fan.
Is it possible to run a large activated carbon panel filter on the intake side of the fan for odour remediation?

These fans are not designed to work efficiently if much static pressure is present in the space. Depending on the density of the filter, it may or may not work well with this fan.
can this fan be used for a powder coating booth

This fan should work well for this application, as long as there are no flammable / ignitable fumes being created in this space.
Is the outside louver cabinet welded / secured permanently to the fan motor mount support or can it be removed. i would like to replace the existing one with a new P36-7 and keep the exterior louver cabinet.

The shutter housing is solid but you can remove the guard and the motor and the fan blade.
i want to use to exhaust a pole barn. temp can get over 120 degrees. can this fan handle hotter temps?

This fan, like most fans, has an ambient temperature rating of 104 deg. F. Since air is moving over the motor as the fan is exhausting, this helps to cool the temperature of the motor.
Can i use a speed cotroller on this fan ?

This fan has a single speed motor. It is On or Off only.

SD Exhaust Fan w/ Shutters 1 Speed 36 inch 10000 CFM Direct Drive SD36-G1D

Build Time

Highly Recommended Items:

QUESTIONS & ANSWERS

SD Exhaust Fan w/ Shutters 1 Speed 36 inch 10000 CFM Direct Drive SD36-G1D

Build Time

Highly Recommended Items:

QUESTIONS & ANSWERS

Similar Products To Consider