3 Speed Shutters Exhaust Fan w/ Cord 12 inch 1000 CFM Direct Drive SF12110C3
The product Build Time you see represented on this site is only a typical number of days the manufacturer states it needs to build the product(s) when ordered. Build times are based on business days (excludes weekends & holidays).
The build time does not include the time it will take to ship the order to you (the customer). If an order has multiple items and comes from multiple warehouses, you may receive part of your order on one day, and then receive the remaining part(s) of your order at a later date.
*Please be aware that seasonal demand of certain equipment may cause build times to run longer than what is typical.
|Quantity||Unit Price||You Save|
These SF shutter exhaust fans have a totally enclosed motor and comes complete with built in speed switches and a 9' cord. No electrician is required, just mount the fan in the wall and plug it into an approved receptacle. The corrosion resistant aluminum shutter comes complete with a tie bar to reduce shutter flapping and keep the shutters closed when the fan is not running. On the intake side of the fan the balanced aluminum blade is protected by a strong painted grill.
Built in speed switch with 9' cord attached
Comes totally assembled out of the box
Totally enclosed maintenance free motor
Corrosion resistant aluminum shutter with tie bar to reduce shutter flapping and opening on windy days
Safety painted grill on intake side meets osha standards
F Class Insulated
Follow NEMA standards either 48 or 56 frame
Dupont Nomex insulation
Rotors have been balanced to reduce noise vibration and prolong life
Motor enclosures have been machined to <0.5mm to reduce rotor shaft play
CSA/CSA-US for an ambient temperature of 40 deg. C but will stand up to 65 deg. C (149 deg. F.)
Copper windings rated at h class
Bearing specifications - 40 deg. C to 140 deg. C
Capacitor rating 450 vac, 10,000 hours for extended life
Silicon steel rotors and stators
Designed for agricultural, horticultural,factories, warehouses, garages, attics and restaurants
Remove and control unwanted condensation
Exhaust obnoxious fumes
Exhaust excessive heat
Improve inside air quality
* Rough in Opening = 12.5 inch square
- Model No.:
- Exhaust Fans
- 0.9 / 0.7 / 0.6
- Blade Material:
- Blade Size (Inches):
- No. of Blades:
- CFM Low:
- CFM Medium:
- CFM High:
- Decibels (dBA):
- 52 / 48
- Drive Type:
- Limited Warranty:
- 2 Year Motor / 1 Year Limited Fan Parts
- Motor Type:
- RPM High:
- Weight lbs.:
Notice: Manufacturer's products features and specifications are subject to change without notice.
California Residents: WARNING- This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
QUESTIONS & ANSWERSAsk a Question
What clearance is required overall to mount the fan (edge to edge dimensions of mounting frame)?
The rough-in opening needs to be 12.5" x 12.5". We always suggest waiting for the fan to arrive before cutting the opening due to the potential that a manufacturer change to the design without notice.
What is overall depth of the fan from face where it mounts to the back of the motor?
The overall depth on this fan from front to back of motor is approx. 11 inches
What is the static pressure at rated CFM?
The 1000 CFM is based on 0.10 Static Pressure
CFM? Opening cut out size?
This fan model produces roughly 1000 CFM. Rough-in opening needs to be 12.5" x 12.5"