Upblast Centrifugal Roof Exhaust 10 inch 1510 CFM Belt Drive STXB10RHULPH1S

Model:: STXB10RHULPH1S

Brand:: Soler & Palau

Build Time:: 10 Weeks ?

Ships By:: Freight

Highly Recommended Items:

LIST: ~~$1,822.49~~

Only $1,087.86

Qty:

FREE SHIPPING
LOW PRICE GUARANTEE
AUTHORIZED DEALER
EXPERT ADVICE
711216||721816v||411012||400252||90005891-a
MADE IN USA

For grease removal applications the fan must be installed per NFPA 96 and with a 40" discharge height and hinged access base.
Restaurant curbs must be 18" high minimum per NFPA-96.
Do not use damper for fans in grease removal applications per NFPA 96.

**Can withstand ambient temperatures up to 300F**

NOTE: UL LISTED POWER ROOF VENTILATOR STANDARD 705 AND 762

Choose Single or Three Phase. Isolation of the motor and drive components from the air stream and the high velocity vertical air discharge make the model TXB-UL762 ideally suited for the removal of dirty, contaminated and/or high temperature air from processes and buildings. Typical applications include restaurant hoods and similar kitchen exhaust ventilation, fume and smoke removal, laboratory fume hood exhaust and chemical process exhaust.

CONSTRUCTION:
Housing:
Heavy-gauge aluminum housing and pre-punched galvanized steel curb cap.
Enclosed,Ventilated motor/drive compartment isolates motor and drives from exhaust air.
The motor compartment housing easily removes for complete maintenance access.
Water-tight conduit tube for easy electrical connection without having to wire through the breather tube.
External weather proof disconnect is included on standard models.

Centrifugal Wheel
Non-overloading backward inclined for safe operation in ducted systems.
Heavy aluminum hub for extra strength.
Statically and dynamically balanced for smooth operation.

Motors
Single speed drip-proof motors are provided on standard models.
All motors are rated for continuous duty.
Disconnect is standard with single speed drip-proof motors.

Drives
Sized for minimum 150% of drive horse power
Machined cast iron adjustable motor pulleys.
Adjustable base for belt tensioning.
Static resistant V-belt.

Bearings
Designed for 200,000 hour average life.
Heavy-duty cast pillow block ball bearing type.
Pre-lubricated with zerk fitting.

DIMENSIONAL DATA

A = 18 inches
B = 29-5/16 inches
C = 28-5/8 inches
D = 24-5/16 inches

Roof Opening = 13-1/2 inches
Curb O.D. = 16-1/2 inches

Model No.:: STXB10RHULPH1S

Voltage:: 115

Warehouse:: Florida

Made In U.S.A.:: Yes

Type:: Exhaust Fans

Amps:: -

Blade Material:: Aluminum

Blade Size (Inches):: 10

CFM High:: 1510

Hertz:: 60

Drive Type:: Belt

Horsepower:: 1/3

Limited Warranty:: 1 Year Limited

Motor Type:: ODP

RPM High:: 1800

Phase:: 1

Speed(s):: 1

Weight lbs.:: 95

Notice: Manufacturer's products features and specifications are subject to change without notice.

California Residents: warning

WARNING- This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.

Installation Manual

Information Manual

Submittal

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question

Upblast Centrifugal Roof Exhaust 10 inch 1510 CFM Belt Drive STXB10RHULPH1S

Build Time

Highly Recommended Items:

QUESTIONS & ANSWERS

Have a Question?

Similar Products To Consider