Upblast Centrifugal Roof Exhaust 14 inch 3435 CFM Belt Drive STXB14RHULSH1S
The product Build Time you see represented on this site is only a typical number of days the manufacturer states it needs to build the product(s) when ordered. Build times are based on business days (excludes weekends & holidays).
The build time does not include the time it will take to ship the order to you (the customer). If an order has multiple items and comes from multiple warehouses, you may receive part of your order on one day, and then receive the remaining part(s) of your order at a later date.
*Please be aware that seasonal demand of certain equipment may cause build times to run longer than what is typical.
NOTE: UL LISTED POWER ROOF VENTILATOR STANDARD 705 AND 762
For grease removal applications the fan must be installed per NFPA 96 and with a 40" discharge height and hinged access base.
Restaurant curbs must be 18" high minimum per NFPA-96.
Do not use damper for fans in grease removal applications per NFPA 96.
**Can withstand ambient temperatures up to 300F**
Choose Single or Three Phase. Isolation of the motor and drive components from the air stream and the high velocity vertical air discharge make the model TXB-UL762 ideally suited for the removal of dirty, contaminated and/or high temperature air from processes and buildings. Typical applications include restaurant hoods and similar kitchen exhaust ventilation, fume and smoke removal, laboratory fume hood exhaust and chemical process exhaust.
Heavy-gauge aluminum housing and pre-punched galvanized steel curb cap.
Enclosed,Ventilated motor/drive compartment isolates motor and drives from exhaust air.
The motor compartment housing easily removes for complete maintenance access.
Water-tight conduit tube for easy electrical connection without having to wire through the breather tube.
External weather proof disconnect is included on standard models.
Non-overloading backward inclined for safe operation in ducted systems.
Heavy aluminum hub for extra strength.
Statically and dynamically balanced for smooth operation.
Single speed drip-proof motors are provided on standard models.
All motors are rated for continuous duty.
Disconnect is standard with single speed drip-proof motors.
Sized for minimum 150% of drive horse power
Machined cast iron adjustable motor pulleys.
Adjustable base for belt tensioning.
Static resistant V-belt.
Designed for 200,000 hour average life.
Heavy-duty cast pillow block ball bearing type.
Pre-lubricated with zerk fitting.
A = 20 inches
B = 30-7/8 inches
C = 31-5/16 inches
D = 25-15/16 inches
Roof Opening = 15-1/2 inches
Curb O.D. = 18-1/2 inches
- Model No.:
- Exhaust Fans
- Blade Material:
- Blade Size (Inches):
- CFM High:
- Drive Type:
- Limited Warranty:
- 1 Year Limited
- Motor Type:
- RPM High:
- Weight lbs.:
Notice: Manufacturer's products features and specifications are subject to change without notice.
California Residents: WARNING- This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
QUESTIONS & ANSWERSAsk a Question
Can the fan speed be controlled
No, this particular unit can not be speed controlled. Tyically VFD variable frequency drives are used on fans with 2 horsepower or greater, and motor needs to be rated 3 Phase.