Skip to main content

STXD Upblast Centrifugal Roof Exhaust 8 inch 935 CFM Direct Drive STXD08MH1AS

Soler & Palau
Ships By:

Build Time

The product Build Time you see represented on this site is only a typical number of days the manufacturer states it needs to build the product(s) when ordered. Build times are based on business days (excludes weekends & holidays).

The build time does not include the time it will take to ship the order to you (the customer). If an order has multiple items and comes from multiple warehouses, you may receive part of your order on one day, and then receive the remaining part(s) of your order at a later date.

*Please be aware that seasonal demand of certain equipment may cause build times to run longer than what is typical.

Highly Recommended Items:

LIST: $1,546.65
You save 34% ($516.37)
Your Price: $987.80

Model STXD direct drive fans are designed to exhaust air in high static pressure applications to 1-1/2”. The aluminum exterior provides an attractive appearance. The non-overloading backward inclined wheel with its higher static pressure capability makes this unit suitable for either ducted or non-ducted applications. Its roof or wall mounting permits location near the area to be ventilated, allowing short duct runs and more efficient operation. Direct drive units use smaller diameter wheels with lower rpm's, resulting in low sound levels and quiet operation. They have no belts or fan bearings to maintain or adjust and consequently require very little maintenance.

Isolation of the motor from the air stream and the high velocity vertical (roof) or horizontal (wall) air discharge make the Model STXD ideally suited for the removal of dirty, contaminated and/or high temperature air from processes and buildings. Typical applications include restaurant hoods and similar kitchen exhaust ventilation, fume and smoke removal, laboratory fume hood exhaust and chemical process exhaust.

Temperature rating up to 300 degrees F
Spun aluminum exterior
Direct drive units have low sound levels and quiet operation
Curved non-overloading backward inclined wheel for efficiency at higher static pressures
Roof or sidewall mounting options
AMCA tested
Miami-Dade NOA, Florida Product Approval and Texas Department of Insurance Licensing available upon request

Model No.:
115 / 208 / 230
Made In U.S.A.:
Exhaust Fans
Blade Material:
CFM High:
Drive Type:
Limited Warranty:
1 Year Limited Motor
RPM High:
Notice: Manufacturer's products features and specifications are subject to change without notice.
California Residents: warning WARNING- This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please visit


Ask a Question
  • Will this match perfectly with a Z Line 5971-RS-30 Island Range Hood? It has a remote blower that I would not be able to use. Do you recommend another similar Island 30 inch range hood that would match with your roof mount blower? Will I be able to use the fan speeds? What are the Sons with this blower. I believe it uses an 8 inch round duct. Thanks,

    Your questions would be best answered by a technical representative at Soler & Palau  800.961.7370