STXD Explosion Proof Upblast Centrifugal Roof Exhaust 10 inch 1445 CFM Direct Drive STXD10PH1ASEXP

Model:
STXD10PH1ASEXP
Brand:
Soler & Palau
Build Time:
10 to 15 Business Days ?
Ships By:
Freight

Build Time

The product Build Time you see represented on this site is only a typical number of days the manufacturer states it needs to build the product(s) when ordered. Build times are based on business days (excludes weekends & holidays).

The build time does not include the time it will take to ship the order to you (the customer). If an order has multiple items and comes from multiple warehouses, you may receive part of your order on one day, and then receive the remaining part(s) of your order at a later date.

*Please be aware that seasonal demand of certain equipment may cause build times to run longer than what is typical.

Highly Recommended Items:

LIST: $1,546.00
Only $1,213.42

NOTE: Temperature Rating up to 300°

CONSTRUCTION: *You can not use a damper or birdscreen in a grease application.

Isolation of the motor from the air stream and the high velocity vertical (roof) or horizontal (wall) air discharge make the Model STXD ideally suited for the removal of dirty, contaminated and / or high temperature air from processes and buildings. Typical applications include fume and smoke removal, laboratory fume hood exhaust, chemical process exhaust, restaurant hoods and similar kitchen exhaust ventilation,.

The non overloading wheel with its higher static pressure capability makes this unit suitable for either ducted or non-ducted applications. Its roof or wall mounting permits location near the area to be ventilated, allowing short duct runs and more efficient operation. They have no belts or fan bearings to maintain or adjust and consequently require very little maintenance.

Housing
Heavy-gauge aluminum for extra strength with pre-punched mounting holes
Neoprene isolators for reduction of vibration and sound
Cover easily removed for quick access to motor compartment
Enclosed,Ventilated motor compartment isolates motor from exhaust air
Water tight conduit tube for easy electrical connection
Lifting lugs for easy and safe placement on roof
Stainless steel exterior fasteners

Centrifugal Wheel
All aluminum backward inclined wheel
Non-overloading for safe operation in ducted systems
Dynamically balanced for smooth operation
Motors are single speed
All motors are rated for continuous duty
Motors ship mounted as standard

* NOTE: HAZARDOUS LOCATION FANS ARE SPECIAL NON-STOCK ITEMS AND CANNOT BE RETURNED OR CANCELLED.

NOTE: Explosion resistant units are not available with the UL label. Disconnect not included.

Class 1 Group D and Class II Group F & G only.

 DIMENSIONAL DATA

A = 18 inches
B = 25-5/16 inches
C = 28-5/8 inches
D = 20-5/16 inches

Roof Opening = 13-1/2 inches
Curb O.D. = 16-1/2 inches

Model No.:
STXD10PH1ASEXP -115
Voltage:
115 / 208 - 230
Warehouse:
Florida
Made In U.S.A.:
Yes
Type:
Explosion Proof Fans
Amps:
6.6 / 3.3
Blade Material:
Aluminum
Blade Size (Inches):
10
CFM High:
1445
Construction:
Aluminum
Hertz:
60
Drive Type:
Direct
Horsepower:
1/3
Limited Warranty:
1 Year Limited Motor
Motor Type:
Explosion Proof
RPM High:
1725
Phase:
1
Weight lbs.:
115
Notice: Manufacturer's products features and specifications are subject to change without notice.
California Residents: warning WARNING- This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question