Upblast Centrifugal Roof Exhaust 14 inch 3132 CFM Belt Drive STXB14RHULRH1S
Highly Recommended Items:
NOTE: UL LISTED POWER ROOF VENTILATOR STANDARD 705 AND 762
For grease removal applications the fan must be installed per NFPA 96 and with a 40" discharge height and hinged access base.
Restaurant curbs must be 18" high minimum per NFPA-96.
Do not use damper for fans in grease removal applications per NFPA 96.
**Can withstand ambient temperatures up to 300F**
Choose Single or Three Phase. Isolation of the motor and drive components from the air stream and the high velocity vertical air discharge make the model TXB-UL762 ideally suited for the removal of dirty, contaminated and/or high temperature air from processes and buildings. Typical applications include restaurant hoods and similar kitchen exhaust ventilation, fume and smoke removal, laboratory fume hood exhaust and chemical process exhaust.
CONSTRUCTION:
Housing:
Heavy-gauge aluminum housing and pre-punched galvanized steel curb cap.
Enclosed,Ventilated motor/drive compartment isolates motor and drives from exhaust air.
The motor compartment housing easily removes for complete maintenance access.
Water-tight conduit tube for easy electrical connection without having to wire through the breather tube.
External weather proof disconnect is included on standard models.
Centrifugal Wheel
Non-overloading backward inclined for safe operation in ducted systems.
Heavy aluminum hub for extra strength.
Statically and dynamically balanced for smooth operation.
Motors
Single speed drip-proof motors are provided on standard models.
All motors are rated for continuous duty.
Disconnect is standard with single speed drip-proof motors.
Drives
Sized for minimum 150% of drive horse power
Machined cast iron adjustable motor pulleys.
Adjustable base for belt tensioning.
Static resistant V-belt.
Bearings
Designed for 200,000 hour average life.
Heavy-duty cast pillow block ball bearing type.
Pre-lubricated with zerk fitting.
DIMENSIONAL DATA
A = 20 inches
B = 30-7/8 inches
C = 31-5/16 inches
D = 25-15/16 inches
Roof Opening = 15-1/2 inches
Curb O.D. = 18-1/2 inches
- Model No.:
- STXB14RHULRH1S
- Voltage:
- 115
- Warehouse:
- Florida
- Type:
- Exhaust Fans
- Amps:
- -
- Blade Material:
- Aluminum
- Blade Size (Inches):
- 14
- CFM High:
- 3132
- Hertz:
- 60
- Drive Type:
- Belt
- Horsepower:
- 3/4
- Limited Warranty:
- 1 Year Limited
- Motor Type:
- ODP
- RPM High:
- 1550
- Phase:
- 1
- Speed(s):
- 1
- Weight lbs.:
- 109
-
Notice: Manufacturer's products features and specifications are subject to change without notice.
-
California Residents:

QUESTIONS & ANSWERS
Ask a Question-
Can this be wall mounted?
Yes, this fan can be wall mounted.
-
I have a jen co fan. Nbrtd14cf3725dr. Single phase and I want to replace. Im concerned that this could be to much or not enough please let me know if this has same property's
THis would be replaced with either the STXB15RHULRH1S (1 phase)Â or the STXB15RHULRH3S (3 phase)