VCN Outside Wall Mount Exhaust Fan for 4 inch Duct 238 CFM VCN 100

The VENTS VCN outdoor wall-mounted exhaust fan is ideal for residential and commercial applications where quiet and powerful exhaust is required and the space is limited. It allows powerful air extraction from one or more points and is suitable for connection to long duct runs. The external installation guarantees a noise-free solution for homes, offices, and commercial facilities. Fans have a casing made of steel with polymer coating and insect proof mesh. Motors are supplied with automatic reset thermal protection, and are equipped with ball bearings for longer service life (40,000 hrs). The VENTS VCN series fans have been specifically designed for simple installation and many years of maintenance free operation. The casing is removable for immediate access to the motor and wiring connections. VENTS VCN sizes range from 4" to 8", with air flow ranging up to 306 CFM. Low noise, smooth and reliable operation are the attributes of VENTS VCN centrifugal fans.

CASING
Fans have a casing made of steel with polymer coating and insect proof mesh.
The casing is removable for immediate access to the motor and wiring connections.

MOTOR
The external rotor single-phase asynchronous motor motor on ball bearings
and the backward curved, balanced impeller ensure high pressure
in ventilation ducts, prevent vibration and assure quiet operation.

APPLICATIONS:

Bathroom exhaust
Kitchen ventilation
Living area
Whole house ventilation
Workshops & smoking areas
Offices
Bars & Restaurants
Warehouses

FEATURES:

High airflow and static pressure applications
Quiet & efficient, vibration free operation
Durable and corrosion resistant casing
Durable, external rotor motor design
Permanently lubricated ball bearing motors for maintenance-free operation
Automatic reset thermal overload protection
Casing can be easily removed for cleaning
Rated for continuous operation
Optimized efficiency, low maintenance costs
ETL listed
Five year warranty
Suitable for working air streams up to 113°F

Dimensional data: (inches)

d = 3 15/16"

h = 14"

b = 10 1/4"

l = 5 7/16"

Model No.:: VCN100

Voltage:: 120

Warehouse:: New York

Type:: Exhaust Fans

Blade Size (Inches):: 4

CFM High:: 238

Construction:: Plastic

Decibels (dBA):: 7.2 Sones

Dimension Inches:: Width: 10-1/4" Depth: 5/7/2016" Height: 14"

Hertz:: 60

Drive Type:: Direct

Limited Warranty:: 5 Year Limited

RPM High:: 3100

Phase:: 1

Speed(s):: 1

Watts High:: 108

Weight lbs.:: 9

Notice: Manufacturer's products features and specifications are subject to change without notice.

California Residents: warning

WARNING- This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.

User's Manual

QUESTIONS & ANSWERS

Ask a Question

Our kitchen is approximately 14 x 20 and has its own attic space with a slanted roof. The max height from the top of the ceiling to the top of the roof is about 3 1/2 feet and it slopes down from there. We would like to put an exhaust fan on one side of the attic space to draw air through a vent on the other side. Would this fan be suitable for this operation?

Please call 866.727.1060 to speak with a sales team member regarding your requirements.
Do you sell the interior wall components to use this in a finished residential kitchen...e.g. face plate, grill, and switches?

Unfortunately, at this time, we do not carry the interior wall accessories for this unit.
What type of controller can be used with this so it runs on time intervals? Need to run the fan every 15 mins or so, instead of steady-is this even possible?

This type of timer control is not something Industrial Fans Direct currently carries.
I am unable to use a 6" duct as specified for my 420 cu ft powered hood vent due to structural limitations. 4" duct max possible. In addition to the self-contained blower in the hood could I add an additional external powered vent as a "helper"? Total run is 10 ft with 1 elbow

Yes, adding this additional fan will not double your CFM, but it will help to move more air through the existing duct quicker.
Can I add a variable speed switch to the vcn 100

No. This particular vent fan is not designed to be run with a variable speed control. It has a 1 speed motor only, so it is On or Off.

VCN Outside Wall Mount Exhaust Fan for 4 inch Duct 238 CFM VCN 100

Build Time

QUESTIONS & ANSWERS

Similar Products To Consider