VPES Outdoor Rated Shutter Exhaust Fan w/ Cord 20 inch 4220 CFM 3 Speed VPES20
The product Build Time you see represented on this site is only a typical number of days the manufacturer states it needs to build the product(s) when ordered. Build times are based on business days (excludes weekends & holidays).
The build time does not include the time it will take to ship the order to you (the customer). If an order has multiple items and comes from multiple warehouses, you may receive part of your order on one day, and then receive the remaining part(s) of your order at a later date.
*Please be aware that seasonal demand of certain equipment may cause build times to run longer than what is typical.
Indoor/Outdoor ES Shutter Fan with 9' Cord, Switch and Pull Cord means "No Electrician Required" installation.
The VPES Series of exhaust fans combine great performance, smooth operation, and totally enclosed UL507 outdoor certified energy efficient motor. Each fan has a built in 9' cord and switch for "no electrician required" operation. The OSHA approved chrome grill allows for easy cleaning, and the aluminum shutter and tie bar eliminate shutter flapping and locking open.
When applied properly these fans can be used in the following applications:
Eliminate heat build-up inside your buildings
Improve air quality
Designed for agriculture, horticulture and industrial applications
Unbelievable smooth and quiet operation
Comes totally assembled out of the box
No electrician required when plugged into a locally approved electrical circuit
Aluminum blade with a zinc plated steel hub balanced for smooth vibration - free operation. Pitch is designed to correlate with motor horsepower to deliver maximum efficiency.
Chrome grill allows for easy cleaning and meets OSHA guidelines. (OSHA approved on interior wall and approved on exterior wall when mounted 7' above ground.)
9 ' Cord attached is wired for a 115 Volt plug
Extremely energy efficient, totally enclosed, maintenance free, direct drive high efficiency motors have completely sealed ball bearings, UL and ULC certification, built in automatic thermal overload protection, covered by a full two year warranty.
- Model No.:
- Exhaust Fans
- Blade Material:
- Blade Size (Inches):
- No. of Blades:
- CFM Low:
- CFM Medium:
- CFM High:
- Dimension Inches:
- Width: 23" Depth: 8.94" Height: 23"
- Drive Type:
- Limited Warranty:
- 2 Year Limited
- RPM High:
- 1570 / 1400 / 1000
- Weight lbs.:
Notice: Manufacturer's products features and specifications are subject to change without notice.
California Residents: WARNING- This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
QUESTIONS & ANSWERSAsk a Question
can you purchase with a thermostat?
You can use a thermostat with this exhaust fan. You will need a thermostat that can be plugged into since this fan has a cord and plug installed.
What is the cam and rpm of the 3 speeds
Low CFM is 1277 / Medium CFM is 1744 / High CFM is 4220
Can fan be used for 3000 cubic foot woodworking shop?
This fan may produce too much CFM on high for a shop of this size. It can be ran at lower speeds that should work for this application.
Please advise how many amps is required to operate this fan on high speed.
This fan runs at 1.5 full load amps
Can you use a fan contro speed switch with this fan?
No. The 3 speed control is built into the fan itself.
What is the sone rating on this fan?
Unfortunately, this fan manufacturer (J&D Mfg.) does not offer sound level ratings on their fans at this time.
Can this fan be mounted vertical with shutters up?
This fan is not designed for horizontal mounting (shutters aiming upward), due to shutter chatter. This fan is designed for vertical or wall mount.