ZephyrPro HVLS Ceiling Fan 14 foot w/ Remote 15386 Sq Ft Coverage 3 Phase 575 Volt ZP-1443-557-3

Highly Recommended Items:
Only
$4,950.00
Quantity | Unit Price | You Save |
---|---|---|
3-5 | 4% | |
6+ | 7% |
NOTE: FANS ARE NON-STOCK ITEMS AND CANNOT BE RETURNED OR CANCELLED.
National Fan Co HVLS ceiling fan is equipped with five high performance STOL design blades constructed of E420 non-anodized aluminum. Contoured for maximum air movement, so environments become cooler faster. The wingtips are constructed of nylon 66, and can redirect outward airflow into downward airflow to improve and direct airflow downwards.
1/4" powder-coated steel and anodized aluminum resists rusting and corrosion even in cold and damp environments. Stainless steel safety brackets are included. The direct drive system allows this fan to operate incredibly quiet. Totally enclosed direct drive, IP65 rated ECM motor. Onboard VFD is factory assembled and programmed for minimum start/stop torque loads.
Yoke Fan Control
Easily mounted to wall
Control each fan individually
With 100 ft. controller cable for installation
Operate your fans in either forward (cooling) or reverse (destratification)
VFD
NEMA1, IP 10 metal enclosure with hinged door. (NEMA 4x, IP 66 available)
Factory assembled & programmed
Minimum start/stop torque loads
Destratification
Reduce energy costs up to 30% by minimizing the temperature differential from the ceiling to the floor
Eliminate hot/cold layers
Maintains comfort levels throughout building
Improved employee comfort
Noise produced when operating is close to that of an average library
Less run time on existing HVAC units
Cooling
Create constant airflow to reduce perceived temperatures by 10 to 15 degrees Fahrenheit
Maintains comfort levels throughout the building
More energy efficient than average small high speed fans with much higher air volumes
Minimizes humidity and condensation
APPROVALS
ETL
CE
C-Tick
MOTOR
Open Drip Proof (ODP)
IP55 rating
Class F insulation
1.0HP (0.75 kW) nominal horsepower
National Fan Co HVLS ceiling fan is equipped with five high performance STOL design blades constructed of E420 non-anodized aluminum. Contoured for maximum air movement, so environments become cooler faster. The wingtips are constructed of nylon 66, and can redirect outward airflow into downward airflow to improve and direct airflow downwards.
1/4" powder-coated steel and anodized aluminum resists rusting and corrosion even in cold and damp environments. Stainless steel safety brackets are included. The direct drive system allows this fan to operate incredibly quiet. Totally enclosed direct drive, IP65 rated ECM motor. Onboard VFD is factory assembled and programmed for minimum start/stop torque loads.
Yoke Fan Control
Easily mounted to wall
Control each fan individually
With 100 ft. controller cable for installation
Operate your fans in either forward (cooling) or reverse (destratification)
VFD
NEMA1, IP 10 metal enclosure with hinged door. (NEMA 4x, IP 66 available)
Factory assembled & programmed
Minimum start/stop torque loads
Destratification
Reduce energy costs up to 30% by minimizing the temperature differential from the ceiling to the floor
Eliminate hot/cold layers
Maintains comfort levels throughout building
Improved employee comfort
Noise produced when operating is close to that of an average library
Less run time on existing HVAC units
Cooling
Create constant airflow to reduce perceived temperatures by 10 to 15 degrees Fahrenheit
Maintains comfort levels throughout the building
More energy efficient than average small high speed fans with much higher air volumes
Minimizes humidity and condensation
APPROVALS
ETL
CE
C-Tick
MOTOR
Open Drip Proof (ODP)
IP55 rating
Class F insulation
1.0HP (0.75 kW) nominal horsepower
- Model No.:
- ZP -1443 -557 -3
- Voltage:
- 575
- Warehouse:
- Michigan
- Made In U.S.A.:
- Yes
- Type:
- Ceiling Fans
- Amps:
- 1.69
- Blade Material:
- Aluminum
- Blade Size (Inches):
- 168
- No. of Blades:
- 5
- Construction:
- Steel
- Decibels (dBA):
- <35 @ 20'
- Dimension Inches:
- Width: 168" Depth: 168" Height: 25"
- Hertz:
- 60
- Drive Type:
- Direct
- Horsepower:
- 1
- Limited Warranty:
- Motor, Gearbox and Electronics: 1 Year Limited Blades and Hub: 15 Year Limited
- Motor Type:
- ODP
- Phase:
- 3
- Speed(s):
- Variable
- Weight lbs.:
- 120
-
Notice: Manufacturer's products features and specifications are subject to change without notice.
-
California Residents:

QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.