AirFlo-PF Panel Exhaust Fan 14 inch 1632 CFM Variable Speed PF141VHE

Model:: PF141VHE

Brand:: National Fan Co.

Build Time:: 4 Weeks ?

Ships By:: FedEx Ground

Highly Recommended Items:

LIST: ~~$523.13~~

Only $233.12

Qty:

Quantity	Unit Price	You Save
3-5		4%
6+		7%

All variable speed fans will run at a single speed unless used with a controller. Please see our control options here for a control that pairs with this fan.

Fans are sturdily constructed, direct drive, horizontal discharge for industrial, commercial and farm applications.

Features:
sturdily constructed direct drive, horizontal discharge fan.
durable powder coat finish.
standard heavy duty OSHA motor mount/guard.
motors are totally enclosed, with overload protection.

*Note: the motor full load amperage ratings are meant to be used as a general guideline only. the ratings are from the primary motor supplier. these amperage ratings may vary slightly if a different motor supplier is used. it is also possible that a motor manufacture may modify / improve / update a motor in which the amperage rating will change slightly.

DIMENSIONS:
*Sizes are approximates and may vary based on motor manufacturer
A = 19-1/4" Square
B = 11"
C = 18"

Model No.:: PF141VHE

Voltage:: 115

Warehouse:: New York

Type:: Exhaust Fans

Amps:: 1

Blade Material:: Aluminum

Blade Size (Inches):: 14

CFM High:: 1632

Construction:: Steel

Dimension Inches:: Width: 19-1/4" Depth: 11" Height: 19-1/4"

Hertz:: 60

Drive Type:: Direct

Horsepower:: 1/15

Limited Warranty:: 1 Year

Phase:: 1

Speed(s):: Variable

Weight lbs.:: 25

Notice: Manufacturer's products features and specifications are subject to change without notice.

California Residents: warning

WARNING- This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.

QUESTIONS & ANSWERS

Ask a Question

I'm putting an exhaust fan in my garage gable area. Is this an electrical plug in (desired) or hard wire? What is low cfm (re var speed). Where do I control speed - remotely or on unit? What is noise level in decibels?

Thank you for your question. These units are hard wired, and use a wall mounted controller to control the speed (link below). Max RPM on these is 1700, and the lowest is approximatley 60% of max, so about 1000 rpm. The dB's are 67 at 5'.

https://www.industrialfansdirect.com/products/cn5

AirFlo-PF Panel Exhaust Fan 14 inch 1632 CFM Variable Speed PF141VHE

Build Time

Highly Recommended Items:

QUESTIONS & ANSWERS

Similar Products To Consider