Skip to main content

Shutter Mounted Wall Exhaust Fan 10 Inch w/ 9' Cord & Plug 650 CFM Variable Speed 10SF4V30C

Model:
10SF4V30C
Brand:
Hessaire
Build Time:
10 to 15 Business Days ?
Ships By:
FedEx Ground

Build Time

The product Build Time you see represented on this site is only a typical number of days the manufacturer states it needs to build the product(s) when ordered. Build times are based on business days (excludes weekends & holidays).

The build time does not include the time it will take to ship the order to you (the customer). If an order has multiple items and comes from multiple warehouses, you may receive part of your order on one day, and then receive the remaining part(s) of your order at a later date.

*Please be aware that seasonal demand of certain equipment may cause build times to run longer than what is typical.

Highly Recommended Items:

Only $99.61

All variable speed fans will run at a single speed unless used with a controller. Please see our control options here for a control that pairs with this fan.

Shutter Mounted Exhaust Fan is perfect for removing excess heat, moisture, dust and odors from virtually any residential or commercial space. Applications include: workshops, welding rooms, restaurants, factories, warehouses, barns, and greenhouses. This wall mounted exhaust fan features aluminum blades, OSHA compliant wire guards, and automatic gravity shutters that open and close in conjunction with the operation of the fan. The completely enclosed motor is thermally protected and permanently lubricated. This fan comes fully assembled and ready to install out of the box. 

FEATURES
High efficiency, quiet operating
Variable speed capable models for use with variable speed controls
Sizes 8” - 24” pre-wired with 9ft grounded cord—115v
Guards feature industrial gray polyester powder coating, OSHA spacing
“Rounded” guard design prevents excessive vibration, adds rigidity
Heavy duty aluminum shutters with reinforced corners
Weather stripping on louvers provide maximum seal, prevents rattling
Motor Type: TEAO, IP55 rating
Fans are UL705 certified

DIMENSIONS
13"W x 8"D x 13"H.

ROUGH IN-OPENING
10.5” x 10.5”

Model No.:
10SF4V30C
Voltage:
115
Warehouse:
Alabama
Type:
Exhaust Fans
Amps:
0.6
Blade Material:
Aluminum
Blade Size (Inches):
10
CFM High:
650
Decibels (dBA):
6.19 sones @ 10'
Dimension Inches:
Width: 13" Depth: 8" Height: 13"
Hertz:
60
Drive Type:
Direct
Horsepower:
1/25
Limited Warranty:
2 Year Limited
Motor Type:
Totally Enclosed
Phase:
1
Speed(s):
Variable
Weight lbs.:
17
Notice: Manufacturer's products features and specifications are subject to change without notice.
California Residents: warning WARNING- This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.

QUESTIONS & ANSWERS

Ask a Question
  • Can this fan be installed on a wall with 2x4 studs and siding on both sides; /4" on one side and 1/8" on the other side?

    Dimensions: 13" Wide x 8" Depth x 13"Height

    Rough In-Opening: 10.5” x 10.5”

  • What is approximately the lowest CFM before it stalls when using the MC5 speed control, without the louvers? I assume the louvers will drop at some CFM level, what might that be?

    The MC5 controller will reduce the CFM / speed of the fan by approx. 1/3

  • Can the louvers be opened independently of the fan or do they open only when it is running?

    The shutters open and close with the turning On and Off of the fan.

  • Is the housing aluminum? What areas would be susceptible to rusting?

    Yes. Housing and blade are aluminum.

  • Hi! It says this comes with a cord and a plug, but in the pictures it looks like it needs to be hardwired. Can you please advise which one it is?

    These are the photos that the manufacturer has given us, but the fan does come with cord and plug.

  • Hello is this fan powerful enough to cool a generator in 98 cubic ft storage box.

    This exhaust fan, like all exhaust fans, will need proper intake ventilation.  When you pull air out, new air needs to replace it.  This fan will exchange the air in the box 5 times per minute or so.  You may want to connect a variable speed control to the unit, so it can be turned down if needed.