AX Explosion Proof 24 inch Aluminum Wall Exhaust Fan w/ Shutters 5520 CFM AX24-4
NOTE: Hazardous location fans are special non-stock items and cannot be returned or cancelled.
The Canarm AX series exhaust fans are a sturdily constructed, direct drive, horizontal discharge fan that is typically used for general ventilation of factories, garages, warehouses and other industrial or commercial buildings. The explosion proof AX fans are available in single-speed only. The AX series housings are constructed of heavy duty aluminum with built in shutters that automatically open when the fan starts and gravity closes when the fan stops.
CLASS I, GROUP C - Atmospheres containing ethyl ether, ethylene, gases or vapors of equivalent hazard.
CLASS I, GROUP D - Atmospheres such as acetone, ammonia, benzene, butane, cyclopropane, ethanol, gasoline, hexane, methane, natural gas, naphtha, propane, or gasses or vapors of equivalent hazard.
CLASS II GROUP F - Atmospheres containing carbonaceous dust, including carbon black, charcoal, coal, or coke dusts that have more than 8% total entrapped volatiles, or dusts that have been sensitized by other materials so that they present an explosion hazard.
CLASS II GROUP G - Atmospheres containing combustible dusts not included in group E or F, including flour, grain, wood, plastic and chemicals.
*INSIDE WALL INSTALLATION
Features:8” - 24” models have heavy wire chrome plated
30”, 36” & 42” models have grey powder coated guards.
Explosion proof motors are class i - group c & d, and class ii - group f & g
Motors are totally enclosed, air over with overload protection
Sturdily constructed from all-aluminum extrusions
Standard heavy duty osha motor mount guard
*NOTE: The motor full load amperage ratings are meant to be used as a general guideline only. the ratings are from the primary motor supplier. these amperage ratings may vary slightly if a different motor supplier is used. it is also possible that a motor manufacture may modify / improve / update a motor in which the amperage rating will change slightly.
DIMENSIONS:
A = 28 3/4 in.
B = 25 3/4 in
C = 5 in.
D = 13 3/4 in. (APPROXIMATION DEPENDENT ON MOTOR MANUFACTURER)
- Model No.:
- AX24 -4
- Voltage:
- 115 / 230
- Warehouse:
- New York
- Type:
- Explosion Proof Fans
- Amps:
- 6.6 /3.1- 3.3
- Blade Material:
- Aluminum
- Blade Size (Inches):
- 24
- No. of Blades:
- 4
- CFM High:
- 5520
- Decibels (dBA):
- 77 @ 5ft
- Dimension Inches:
- Width: 28.75" Depth: 18.75" Height: 28.75"
- Hertz:
- 60
- Drive Type:
- Direct
- Horsepower:
- 1/3
- Limited Warranty:
- 1 Year Limited
- Motor Type:
- Explosion Proof
- RPM High:
- 1725
- Phase:
- 1
- Speed(s):
- 1
- Weight lbs.:
- 69
-
Notice: Manufacturer's products features and specifications are subject to change without notice.
-
California Residents:

QUESTIONS & ANSWERS
Ask a Question-
Can this be used for a paint booth
This fan is a paint booth rated explosion proof fan for exhaust.
-
Can you supply a fan chart for this fan, or the CFM at 1/2" of water quage?
These AX series fans are only rated to 1/4" static pressure.
-
Can I use this at the end of 18' of 24" duct as an inline fan?
This fan is not designed to work in ducting due to the static pressure increase.
-
Can you add a filter?
These exhaust fans are not designed to work with much static pressure so the pre-filtration would need to be very minimal.
-
Can this be mounted so the baffles are on the outside of the building?
Yes. This fan is desgned to mount from the inside of the wall, and the shutters aimed to the outside of the building.
-
Can I use a variable speed controller with this model?
These explosion proof fans are designed for On / Off use (not variable speed).