*PICTURE IS A REPRESENTATION OF A KIT ONLY - COMPONENTS INCLUDED IN KIT ARE LISTED BELOW.

IMPORTANT: If venting in an non-insulated attic space, or in a cold climate, insulated flexible duct is strongly recommended for condensation issues.

The TD-MIXVENT fan kits provide all the hardware needed to complete a simple in-line ducted ventilation installation. The kit includes a powerful TD in-line fan and exterior and interior grilles with a vent light. Available in both Standard Exhaust Kits, for venting a single location, and Deluxe Exhaust Kits, for venting multiple locations with one fan. The TD-MIXVENT fan kit is the ideal solution for any simple in-line ducted fan installation. This KIT-TD100XH includes the Vent light with a PAR30 Halogen Bulb.
* All TD Kits have a standard 7 year warranty. *Light bulbs not included in 7 year warranty.

KIT-TD100XH - Lighted Standard Exhaust Kit Includes the Following Components:

• 1 TD100x 4" Exhaust Fan
• 1 Vent Light with Halogen bulb (VLH-100)
• 1 Integral mounting bracket

The new Vent Lights give you ventilation that is "Out of Sight and Out of Mind"! They appear to be a regular can light, and when combined with remotely mounted fan, the noise and unsightly look of the traditional bathroom fan are gone. The Vent Lights are aesthetically pleasing grilles with lights that will match any bathroom decor.

The TD-Mixvent series of in-line duct fans have been specially designed to maximize the airflow performance with minimal noise levels within the smallest and most compact of casing sizes. This makes it the ultimate solution for small to medium sized ventilation installations which require a high air-flow to pressure ratio and occupy only the minimum space possible. Example: false ceiling voids, cupboards and many other limited space environments. All models include a "removable body" feature that enables the motor-impeller assembly to be completely removed or replaced without the need to interfere with the attached ducting. The TD fans are ideally suited for a wide range of residential, commercial and industrial exhaust and intake ventilation applications. Typical applications would include the following.

RESIDENTIAL:

• Bathrooms
• Warm or Cool Air Transfer
• Kitchen Range Hoods
• Utility Rooms

COMMERCIAL:

• Locker Rooms
• Conference Rooms
• Bars & Restaurants
• Cafeterias
• Offices
• Make-Up Air Applications

INDUSTRIAL:

• Welding Fume Extraction
• Spot Ventilation
• Equipment Cooling
• Workshops & Smoking Areas

• Class 1 electrical insulation
• IP 44 Protection
• Class B Motor Insulation
• Safety auto reset Thermal Overload Protection (fuse type)
• Self-lubricating sleeve bearings.
• Suitable for working air streams up to 104° F (40°C).

NOTE**Sound characteristics
Fan sound levels are measured in sones. At this time there are no sone level test standards available through HVI due to the fact that remote mounted fan noise levels are in proportion to the following: type of duct, length of duct, fan distance from the intake source and other miscellaneous factors. However, it is generally accepted that remote mounted venting is usually quieter than standard (in room) venting. All TD Kits have a standard 7 year warranty. *Light bulbs not included in 7 year warranty.

*Performance certified is for installation type D-Ducted inlet, Ducted outlet. Performance ratings do not include the effect of appurtenances(accessories). Speed (RPM or RPS) shown is nominal. Performance is based on actual speed of test.

DIMENSIONAL DATA FOR TD100x EXHAUST FAN: (inches)

X = 7-3/8
A = 11-15/16
B = 6-15/16
C = 4-1/8
D = 3-13/16
E = 3-15/16
F = 3-9/16
G = 3-1/8
H = 2-1/8

DIMENSIONAL DATA FOR VLH-100 VENT LIGHT: (inches)

A = 13 - 24
B = 2-1/4
C = 5-1/4
D = 9
E = 7 sq.