SD Exhaust Fan w/ Shutters 1 Speed 36 inch 10000 CFM Direct Drive SD36-G1D
The product Build Time you see represented on this site is only a typical number of days the manufacturer states it needs to build the product(s) when ordered. Build times are based on business days (excludes weekends & holidays).
The build time does not include the time it will take to ship the order to you (the customer). If an order has multiple items and comes from multiple warehouses, you may receive part of your order on one day, and then receive the remaining part(s) of your order at a later date.
*Please be aware that seasonal demand of certain equipment may cause build times to run longer than what is typical.
|Quantity||Unit Price||You Save|
Canarm/LFI’s standard fans follow a tradition of quality in design, materials and construction. All our standard fans are developed to be efficient and economically priced. Fans are now available with EC motors allowing you to save up to 70% on energy costs.FEATURES
SD36 - 20 Louvers
Single, two and variable speed models are available
All fans use a totally enclosed, thermally protected motor
Rugged steel welded box housing has a durable powder coated finish
Aluminum louver shutters are supported by long life nylon bushings (30”, 36”, 42” & 48” have PVC louvers)
12” - 24” models have heavy wire chrome plated OSHA guards on intake side of fan
12" - 24" models now upgraded with tie bar shutters and magnets for quieter operation and superior seal
30”, 36”, 42” & 48” models have grey powder coated guards
All fans are shipped completely assembled
- Model No.:
- SD36 -G1D
- 115 / 230
- New York
- Exhaust Fans
- 6.6 / 3.3
- Blade Material:
- Heavy-Gauge Aluminum
- Blade Size (Inches):
- No. of Blades:
- CFM High:
- Decibels (dBA):
- 72 @ 5ft
- Dimension Inches:
- Width: 41.25" Depth: 18" Height: 41.25"
- Drive Type:
- Limited Warranty:
- 1 Year Limited
- Motor Type:
- RPM High:
- Weight lbs.:
Notice: Manufacturer's products features and specifications are subject to change without notice.
California Residents: WARNING- This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
QUESTIONS & ANSWERSAsk a Question
Does this fan run on 120 volt, single phase?
Thank you for your question. Yes, this fan can run on 120V single phase. It can also run on 240V single phase and there are instructions included with it to wire it accordingly.
I plan on using a 36" 10 000 CFM (SD36-G1D) in a spray booth roughly 10' x 10' x 8' high. Would this fan be too big for this application?
Thank you for your question. I think that 10,000 CFM will be too much for your application. According to our calculator, to turn the air over every 1 minute, you only need about 1000 CFM. However, in practice, you will need more than that. I would recommend our 24" variable speed unit. You can then have exrta capacity if needed, but could turn it down as well.
If you are spraying anything other than water based products in the booth, you will need an explosion proof fan. They are only offered in 1 speed however.
With either unit, you will want to filter the air going into the fan as they will get fouled with whatever you are spraying very quickly. I would reccommend building a open sided box out of 2x4, attaching hepa style furnace air filters to the open sides, and securing it to the wall between your booth and the intake side of the fan.
Is it possible to run a large activated carbon panel filter on the intake side of the fan for odour remediation?
These fans are not designed to work efficiently if much static pressure is present in the space. Depending on the density of the filter, it may or may not work well with this fan.
can this fan be used for a powder coating booth
This fan should work well for this application, as long as there are no flammable / ignitable fumes being created in this space.
Is the outside louver cabinet welded / secured permanently to the fan motor mount support or can it be removed. i would like to replace the existing one with a new P36-7 and keep the exterior louver cabinet.
The shutter housing is solid but you can remove the guard and the motor and the fan blade.
i want to use to exhaust a pole barn. temp can get over 120 degrees. can this fan handle hotter temps?
This fan, like most fans, has an ambient temperature rating of 104 deg. F. Since air is moving over the motor as the fan is exhausting, this helps to cool the temperature of the motor.
Can i use a speed cotroller on this fan ?
This fan has a single speed motor. It is On or Off only.