SD Exhaust Fan w/ Shutters Variable Speed 24 inch 5050 CFM Direct Drive SD24-GVD
Canarm / LFI’s standard fans follow a tradition of quality in design, materials and construction. All our standard fans are developed to be efficient and economically priced. Fans are available in single, two and variable speed models. All variable speed standard fans use an energy efficient variable speed, dual voltage motor and blade combination.
To determine the proper Canarm/LFI fan for your applications, use the following formula OR automatically calculate it here!
Number of cubic feet in room / Number of minutes per air change = Required C.F.M. Capacity
*INSIDE WALL INSTALLATION
Features:Available in 8” to 42” sizes.
Single, two and variable speed models are available.
All fans use a totally enclosed, thermally protected motor.
The rugged steel welded box housing has a durable powder coated finish.
Aluminum louver shutters are supported by long life nylon bushings
8” - 24” models have heavy wire chrome plated OSHA guards on intake side of fan.
All fans are shipped completely assembled.
*NOTE: The motor Full Load Amperage ratings are meant to be used as a General guideline only. The ratings are from the primary motor supplier. These amperage ratings may vary slightly if a different motor supplier is used. It is also possible that a motor manufacture may modify / improve / update a motor in which the amperage rating will change slightly.
DIMENSIONS:
A = 29 1/4"
B = 16"
C = 6"
D (Center to Center) = 28"
E = 26 3/4"
N = 5
- Model No.:
- SD24 -GVD
- Voltage:
- 115 / 230
- Warehouse:
- New York
- Type:
- Exhaust Fans
- Amps:
- 6.4 / 3.2
- Blade Material:
- Galvanized Steel
- Blade Size (Inches):
- 24
- No. of Blades:
- 3
- CFM Low:
- 800
- CFM High:
- 5050
- Decibels (dBA):
- 72 @ 5 ft
- Dimension Inches:
- Width: 29 1/4" Depth: 16" Height: 29 1/4"
- Hertz:
- 60
- Drive Type:
- Direct
- Horsepower:
- 1/3
- Limited Warranty:
- 1 Year Limited
- Motor Type:
- TE
- RPM High:
- 1100
- Phase:
- 1
- Speed(s):
- Variable
- Weight lbs.:
- 56
-
Notice: Manufacturer's products features and specifications are subject to change without notice.
-
California Residents:

QUESTIONS & ANSWERS
Ask a Question-
Is the motor single phase or 3 phase
1 Phase. The Specifications tab on the product page will offer this information and much more.
-
How many wires to I need to wire it to 220 volts? 3 or 4?
The wiring diagram for connecting to 220 Volt should be on the motor itself. Please contact the manufacturer (Canarm) at 800-267-4427 for further information.