SD Exhaust Fan W/ Shutters 1 Speed 30 inch 8000 CFM Direct Drive (multi-pack discount) SD30-G1D
Canarm / LFI’s standard fans follow a tradition of quality in design, materials and construction. All our standard fans are developed to be efficient and economically priced. Fans are available in single, two and variable speed models. All variable speed standard fans use an energy efficient variable speed, dual voltage motor and blade combination.
To determine the proper Canarm/LFI fan for your applications, use the following formula.
Number of cubic feet in room / Number of minutes per air change = Required C.F.M. Capacity
*INSIDE WALL INSTALLATION
Features:Available in 8” to 42” sizes.
Single, two and variable speed models are available.
All fans use a totally enclosed, thermally protected motor.
The rugged steel welded box housing has a durable powder coated finish.
PVC louvers are supported by long life nylon bushings.
30”, 36” & 42” models have grey powder coated OSHA guards.
All fans are shipped completely assembled.
*NOTE: The motor Full Load Amperage ratings are meant to be used as a General guideline only. The ratings are from the primary motor supplier. These amperage ratings may vary slightly if a different motor supplier is used. It is also possible that a motor manufacture may modify / improve / update a motor in which the amperage rating will change slightly.
DIMENSIONS (inches):
A = 35-1/4" SquareB = 19"
C = 6"
D (Center to Center) = 34"
E = 32-3/4"
N = 16 Louvers
- Model No.:
- SD30 -G1D
- Voltage:
- 115 / 230
- Warehouse:
- New York
- Type:
- Exhaust Fans
- Amps:
- 6.4 / 3.2
- Blade Material:
- Heavy-Gauge Aluminum
- Blade Size (Inches):
- 30
- No. of Blades:
- 3
- CFM High:
- 8000
- Decibels (dBA):
- 82 @ 5ft
- Dimension Inches:
- Width: 35-1/4" Depth: 6" Height: 35-1/4"
- Hertz:
- 60
- Drive Type:
- Direct
- Horsepower:
- 1/3
- Limited Warranty:
- 1 Year Limited
- Motor Type:
- TE
- RPM High:
- 1100
- Phase:
- 1
- Speed(s):
- 1
- Weight lbs.:
- 72
-
Notice: Manufacturer's products features and specifications are subject to change without notice.
-
California Residents:

QUESTIONS & ANSWERS
Ask a Question-
How does it switch on and off?
This exhaust fan would need to be wired to an On / Off switch, or thermostat.
-
I am quoting a project to install an exhaust fan with remote control in an 8-inch thick concrete block (CMU) wall. The sleeve size on this fan is 6-inches. Having the louvers inset by 2-inches may look odd? All of the fans I saw were 6-inches.
You may want to consider the GPX3013 wall exhaust fan. It is still only 6" deep, but mounts from the outside of the building instead of the inside like the SD30-G1D.
-
Can you ha e to big a fan.
When it comes to exhaust fans, the answer is YES, you can have to large of a fan for a given space. You want to determine the size of the area in cubic feet, and then determine the CFM of air movement reqired for the space. This will help to dictate the size exhaust fan you will need.