Upblast Centrifugal Roof Exhaust 8 inch 1047 CFM Belt Drive STXB08RHULMH1S
Highly Recommended Items:
NOTE: UL LISTED POWER ROOF VENTILATOR STANDARD 762
* For grease removal applications the fan must be installed per NFPA 96 and with a 40" discharge height and hinged access base.
* Restaurant curbs must be 18" high minimum per NFPA-96.
* Do not use damper for fans in grease removal applications per NFPA 96.
**Can withstand ambient temperatures up to 300F**
Isolation of the motor and drive components from the air stream and the high velocity vertical air discharge make the model STXB-UL762 ideally suited for the removal of dirty, contaminated and/or high temperature air from processes and buildings. Typical applications include restaurant hoods and similar kitchen exhaust ventilation, fume and smoke removal, laboratory fume hood exhaust and chemical process exhaust.
CONSTRUCTION:Housing:
Heavy-gauge aluminum housing and prepunched mounting holes
Neoprene isolators for reduction of vibratin and sound.
Enclosed, ventilated motor/drive compartment isolates motor and drives from exhaust air.
Cover easily removed for quick access to motor compartment.
Water tight conduit tube for easy electrical connection
External weather proof disconnect is included on standard models.
Lifting lugs for easy and safe placement on roof.
Stainless steel exterior fasteners.
Nonoverloading for safe operation in ducted systems.
All aluminum backward inclined wheel.
Dynamically balanced for smooth operation.
Single speed drip-proof motors are provided on standard models.
All motors are rated for continuous duty.
182T and larger motors shipped unmounted for field installation
Disconnect switch standard with single speed drip-proof motors.
Sized for minimum 150% of drive horse power
Machined cast iron adjustable motor pulleys.
Adjustable base for belt tensioning.
Nonstatic oil resistant v-belts.
Bearings
Heavy-duty ball bearing type.
Prelubricated and permanently sealed.
 DIMENSIONAL DATA
A = 18 inches
B = 29-5/16 inches
C = 28-5/8 inches
D = 24-5/16 inches
Roof Opening = 13-1/2 inches
Curb O.D. = 16-1/2 inches
- Model No.:
- STXB08RHULMH1S
- Voltage:
- 115
- Warehouse:
- Florida
- Type:
- Exhaust Fans
- Blade Material:
- Aluminum
- Blade Size (Inches):
- 8
- CFM High:
- 1047
- Hertz:
- 60
- Drive Type:
- Belt
- Horsepower:
- 1/4
- Limited Warranty:
- 1 Year Limited
- Motor Type:
- ODP
- RPM High:
- 1950
- Phase:
- 1
- Speed(s):
- 1
- Weight lbs.:
- 95
-
Notice: Manufacturer's products features and specifications are subject to change without notice.
-
California Residents:

QUESTIONS & ANSWERS
Ask a Question-
will this work on a pitch roof of 4 an 12. pretty much a standard roof pitch ?
Roof exhaust fans like this are meant to be mounted on a roof curb that keeps the fan at a complete vertical position. The roof curb would be fabricated to work with your 4 / 12 pitch.